LRP Quantum Comp2 and HRS
#1
LRP Quantum Comp2 and HRS
Can anyone confrirm wether the quantum comp 2 and futaba HRS are compatible. I have one of the earlier quantums and it behaves weird.
#2
It works with no problems.
#3
I have problems getting the speedo to 'tie in' to the transmitter.
I can't seem to get the full throttle l.e.d. to light.
I can't seem to get the full throttle l.e.d. to light.
#4
Tech Elite
iTrader: (9)
I know the QC2 has problems with KO servos becasue of an issue with the BEC out of the QC2 to the reciever. If you have a KO servo that could be more of your issue. I suggest you change out to like an airtronics servo or hitec(sorry I never suggest them) see if the problem persists. That is why I use either Artronics Servos or Futaba servos with my QC2's.
Hope this helps.
Stephen <><
Hope this helps.
Stephen <><
#5
Thanks Mr Shookie. I'm using a Futaba digital (9550) and still have this problem. I'm going to try a Novak GTX to see if this solves the problem.
#6
I have run the Q2 with S9550 servo and HRS and no problems. However, Profile 4 does not work in HRS mode.
#7
Tech Addict
Like KilRuf said, from othr people experiences, Ive read that the QC2 wont work with HRS in punch control mode 4 because that is the reactive mode and for some reason, the reactive frequency doesnt work with HRS.
#10
Originally posted by AE Racer
Like KilRuf said, from othr people experiences, Ive read that the QC2 wont work with HRS in punch control mode 4 because that is the reactive mode and for some reason, the reactive frequency doesnt work with HRS.
Like KilRuf said, from othr people experiences, Ive read that the QC2 wont work with HRS in punch control mode 4 because that is the reactive mode and for some reason, the reactive frequency doesnt work with HRS.
For some reason I thought all modes (1-5) were reactive freq.
Thanks, I'll try it again.
#11
hey guys, i am using 3PK HRS with a QC2 and KO Propo PDS2343FET digi servo. the servo glitches like mad if i try to turn it when its getting power from the QC2. i solved this by running the reciever with a small battery pack (which weighs my car down heaps ) is it only the QC2 that does this to the KO Servo's or do other ESC's do the same. im thinking of getting a novak GT7 to run instead of my QC2