Kyosho Touring Car
#1516
I will try to make it out on thursday. Do you know what time he will be there??
#1517
Hi Mike, Figure 6pm is good, hes usually there from 5:30 on but just to be safe 6.
#1518
Tech Master
Join Date: Oct 2003
Location: Bending Corners R/C Raceway(s) 2190 North Canal Street Orange, CA 92865
Posts: 1,140
Official Trophy Race Name
"The Summer Slam"
presented by
Bending Corners Raceway(s)
Flyers are being completed and will be distributed this week are you on the mailing list?
see track photos at http://bcraceways.smugmug.com
Mark [B]your calendar for Saturday, August 18th for "The Summer Slam"
Hey Kyosho, Bending Corners Raceway is also looking for prizes for this event. So if you are interested please email me as you know, I will be calling you.
Raffell
"The Summer Slam"
presented by
Bending Corners Raceway(s)
Flyers are being completed and will be distributed this week are you on the mailing list?
see track photos at http://bcraceways.smugmug.com
Mark [B]your calendar for Saturday, August 18th for "The Summer Slam"
Hey Kyosho, Bending Corners Raceway is also looking for prizes for this event. So if you are interested please email me as you know, I will be calling you.
Raffell
#1519
Tech Adept
Hi I'm just wondering what the effect is of lowering the rear diff and/or
the front spool in the Stallion?
If you could help please Mark.
the front spool in the Stallion?
If you could help please Mark.
#1520
My notes around this are;
-high, will make the car run flat but more responsive.
-low, will increase onpower steering
Generally, I run low front (spool) and high rear (diff).
Two things to watch for;
1- as bite increases the rear might feel it wants to drive over the front. TIme to start lowering the rear diff
2- if the car feel too twitchy off-center; raise the front.
#1523
The key parts needed would include;
-Revised steering assembly
-Shin upper and lower graphite
-Shin right bulkhead
-Shin graphite rear X brace
There are also thicker shower towers and wider suspension block mount. The key parts listed above would get you pretty close.
The setups are pretty adaptable from the Stallion to the Shin Edition.
Good luck!
#1524
hi guys does any one know where there are some set up sheets for the stallion car on the net
#1525
Let us know the track type and surface and we can steer you the right way.
#1526
thanks MDawson im running indoor on carpet in the uk with the basic set up which is good but on about going outside on tarmac running 19 turn what shells do you run i run the andy moore dodge stratus which seems to make the car feel safe
thanks for your help
thanks for your help
#1527
I would start with the Protoform Mazda Speed6 or Mazda6. For a good outdoor setup, try the setup I post some pages back.
Good luck
#1529
Hey guys i was wondering if someone could help me to find part number for the plastic outdrives used in the front spool for the stallion. They are listed as part 141 in the manual but there is no reference to part 141 in the spare parts listings!! please help!
#1530
Tech Elite
iTrader: (10)
just a question for the pro's
i run on ashaplt ,medium grip using foams 40 shore, 3.5BL , blue front springs ,yellow rear, everything else is as per kit setting
having trouble with the rear snapping on weight transfer(say through a quick left right) ,has heaps of steering
any help
thanks
chad
i run on ashaplt ,medium grip using foams 40 shore, 3.5BL , blue front springs ,yellow rear, everything else is as per kit setting
having trouble with the rear snapping on weight transfer(say through a quick left right) ,has heaps of steering
any help
thanks
chad