New releases from RCShox!
Final version of the ball bearing ackerman bar is complete!
"Finally here (well almost!) The RCShox ackerman bar cuts down much of the inherent "slop" that accumulates in the steering system. Not only that but bumpsteer is virtually eliminated as well as the inside pick up points altered. This results in much more mid corner grip and increased corner speed altogether. This is a must have upgrade for you track guys!
Kit comes with Bar, bearings, custom machined bearing spacers and hardware, everything you need for a complete installation!"
Lightened short shock towers:
"One pair of lightened shock towers. These shock towers allow the use of front shocks in the rear, add more front roll center adjustments and are designed with +1 shock positioning in the rear. The inside postion of the stock tower is eliminated and and extra one is placed on the outside, the new shock tower middle is the same as the old shock tower outside position. These shock towers weight exactly half of the stock towers!! bulkhead hardware is included (8 stainless screws) not the aluminum purple screws that are pictured. THE REAR SHOCK TOWER WILL ONLY WORK WITH FRONT SHOCKS."