R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 07-19-2013, 01:16 PM   #181
Tech Elite
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

I found the video. This setup looks legit as it gets.

https://www.youtube.com/watch?v=uiXJ...e_gdata_player
__________________
RC is a way of life and a ridiculous hobby.
Ridiculously Fun! Subscribe to my YouTube Channel! Or ELSE! Hehee! http://www.youtube.com/user/Jstall7543
Jstall7543 is offline   Reply With Quote
Old 07-19-2013, 01:40 PM   #182
Tech Champion
 
MantisWorx's Avatar
 
Join Date: Jun 2010
Posts: 5,830
Trader Rating: 27 (97%+)
Default

Quote:
Originally Posted by Jstall7543 View Post
Is that a home made aluminum splitter under the front bumper?
YEs and it adds steering for sure!

BTW guys I just got these new bodies in my hand and hands down these are the nicest bodies FOr these cars to date!! THey are all long and that suck for me but just for kicks I am going to switch back to the long chassis and see what i can get of it. They even have legitimate Lemans liveries!! the GTR is SUMOracing, MP is Hexis energy drink and the Ferrari is Luxory racing. I will paint them over the next few days and post pix
MantisWorx is offline   Reply With Quote
Old 07-19-2013, 01:47 PM   #183
Tech Addict
 
SNR Graphite's Avatar
 
Join Date: May 2011
Location: So Cal
Posts: 586
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by Jstall7543 View Post
I can't find anything but I did see one guy on youtube with a all carbon gt-v2e setup, his chassis was machined in a way that allowed his dual 4s batteries to sit out against the sides of the body witch I thought was pretty creative he also had the motor to the rear, the chassis was built for speed runs. It's funny you mention it Steve because I've been to your website several times looking for carbon parts for this car. I put your scte carbon tower's thru hell and back for years and never had a problem. SNR make's the best carbon parts IMO.

Thanks for buying my products. Yes I made all that carbon parts for the car
and we use a DM-1 center and motor mount.
__________________
www.snrgraphite.com
SNR Graphite is offline   Reply With Quote
Old 07-19-2013, 02:05 PM   #184
Tech Elite
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by MantisWorx View Post
YEs and it adds steering for sure!

BTW guys I just got these new bodies in my hand and hands down these are the nicest bodies FOr these cars to date!! THey are all long and that suck for me but just for kicks I am going to switch back to the long chassis and see what i can get of it. They even have legitimate Lemans liveries!! the GTR is SUMOracing, MP is Hexis energy drink and the Ferrari is Luxory racing. I will paint them over the next few days and post pix
Shoot, I just had to order a gt2 corvett body to hold me over until your selling these because I had to cut my wheel wells hella big to fit the xo-1 tires and now I'm switching to grp's so it would look silly with the smaller dia tires.

Any idea on a price range for these bodies? When you say liveries will that be in the form of sticker kit or pre painted?
__________________
RC is a way of life and a ridiculous hobby.
Ridiculously Fun! Subscribe to my YouTube Channel! Or ELSE! Hehee! http://www.youtube.com/user/Jstall7543
Jstall7543 is offline   Reply With Quote
Old 07-19-2013, 04:09 PM   #185
Tech Master
 
Monteman's Avatar
 
Join Date: May 2009
Location: Edmonton, Alberta
Posts: 1,279
Trader Rating: 16 (100%+)
Default

I think they are clear and w/stickers.
Skyline was a clear body on the last page.

Regardless im interested. I have a couple Corvettes for my SnR Converted GTP2e, but would love something different.
__________________
Cameron - Edmonton Canada

** Every time see someone use their first post to necro-bump a 4 year old thread all I can think is "at least they used the search function" **
Monteman is offline   Reply With Quote
Old 07-19-2013, 04:35 PM   #186
Tech Initiate
 
Join Date: Jul 2013
Posts: 38
Default

Quote:
Originally Posted by Jstall7543 View Post
Is that a home made aluminum splitter under the front bumper?
Scooby61, yes its a Kyosho DBR9 body.

Jstall, Yes, I think its 1/16th. Pretty light and cf vinyl to finish it. The Kyosho DBR9 body fit perfect. Bumper foam even touches the body and body is snug with the splitter.

Marcus, I sent you a parts list for a quote that has a rear bumper. You could mod that one (I'd want one similar to the Audi splitter that has the lower sheet covering the vertical channels).
__________________
GT-V2e, Slash 4X4, Spartan, Miss Geico, Micro Rally, Drone 2.0
ac555 is offline   Reply With Quote
Old 07-19-2013, 11:31 PM   #187
Tech Champion
 
MantisWorx's Avatar
 
Join Date: Jun 2010
Posts: 5,830
Trader Rating: 27 (97%+)
Default

Quote:
Originally Posted by Jstall7543 View Post
Shoot, I just had to order a gt2 corvett body to hold me over until your selling these because I had to cut my wheel wells hella big to fit the xo-1 tires and now I'm switching to grp's so it would look silly with the smaller dia tires.

Any idea on a price range for these bodies? When you say liveries will that be in the form of sticker kit or pre painted?

They will be in the 65 range, I will probably do some sort of pre-order 50% shipping or something like that. I will figure it out next week.

Quote:
Originally Posted by ac555 View Post
Scooby61, yes its a Kyosho DBR9 body.

Jstall, Yes, I think its 1/16th. Pretty light and cf vinyl to finish it. The Kyosho DBR9 body fit perfect. Bumper foam even touches the body and body is snug with the splitter.

Marcus, I sent you a parts list for a quote that has a rear bumper. You could mod that one (I'd want one similar to the Audi splitter that has the lower sheet covering the vertical channels).
OK, what body will it be for? the audi difuser is too small for the vette and vice versa.
MantisWorx is offline   Reply With Quote
Old 07-19-2013, 11:45 PM   #188
Tech Champion
 
MantisWorx's Avatar
 
Join Date: Jun 2010
Posts: 5,830
Trader Rating: 27 (97%+)
Default

Pre -order will be up mid week at RCShox.com, after i paint them and take some pix/video

This is the MP livery!!
http://www.kodafactory.com/2012/04/m...-gt1-2012.html
Ferrari
http://www.flickr.com/photos/thumpr455/6232796908/
GTR
http://www.wall-online.net/wallpaper...t-2010-09.html
MantisWorx is offline   Reply With Quote
Old 07-19-2013, 11:50 PM   #189
Tech Master
 
Monteman's Avatar
 
Join Date: May 2009
Location: Edmonton, Alberta
Posts: 1,279
Trader Rating: 16 (100%+)
Default

Very nice!
Got to give my painter a break but i will certainly get in on one of these at some point.

Liking the GTR
__________________
Cameron - Edmonton Canada

** Every time see someone use their first post to necro-bump a 4 year old thread all I can think is "at least they used the search function" **
Monteman is offline   Reply With Quote
Old 07-19-2013, 11:54 PM   #190
Tech Elite
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

Ya, I can't wait to check these out! I ruined 2 bodies in 3 days lol! Speed run crashes really mess them up quick.
__________________
RC is a way of life and a ridiculous hobby.
Ridiculously Fun! Subscribe to my YouTube Channel! Or ELSE! Hehee! http://www.youtube.com/user/Jstall7543
Jstall7543 is offline   Reply With Quote
Old 07-20-2013, 12:26 PM   #191
Tech Elite
 
Jspeed's Avatar
 
Join Date: Oct 2006
Location: America!
Posts: 3,511
Default

Quote:
Originally Posted by Jstall7543 View Post
Ya, I can't wait to check these out! I ruined 2 bodies in 3 days lol! Speed run crashes really mess them up quick.

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


The key to running fast & straight with the Warrior body is trimming off the rear spoiler’s center section, while leaving the uprights is ingenious. Just check out Johnracerx’s example shown in this video.

Any top speed runner looking for maximum aerodynamic efficiency should seriously consider doing the same to their Warrior GT bodies too.

Keep on running hard my friends!
Jspeed is offline   Reply With Quote
Old 07-20-2013, 03:29 PM   #192
Tech Elite
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

I am subscribed to john, he's fast as hell and I'm a newb to speed runs. I just wanted to see how the car drove with a stock warrior body, I didn't have time to glass it. The body is fine with the wing on for 100mph and I might run it on the track soon so I just did a quick run. I'm having a harder time finding tires that will hold up (GRP'S just came in) and I need the perfect location. I've never drove a rc this fast, it's so intense and scary for me... anyway now I got grp's and the warrior body is cut for xo-1 wheels and tires so I ordered a kyosho clear gt2 corvette body for the next run.


That warrior body is bad @$$! I'll order another one very soon! I think I know who you are by the way and thanks for your advise!
__________________
RC is a way of life and a ridiculous hobby.
Ridiculously Fun! Subscribe to my YouTube Channel! Or ELSE! Hehee! http://www.youtube.com/user/Jstall7543
Jstall7543 is offline   Reply With Quote
Old 07-20-2013, 10:23 PM   #193
Tech Champion
 
MantisWorx's Avatar
 
Join Date: Jun 2010
Posts: 5,830
Trader Rating: 27 (97%+)
Default

Now this is pretty badazz!!

MantisWorx is offline   Reply With Quote
Old 07-20-2013, 10:29 PM   #194
Tech Elite
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

THAT'S FILTHY!
__________________
RC is a way of life and a ridiculous hobby.
Ridiculously Fun! Subscribe to my YouTube Channel! Or ELSE! Hehee! http://www.youtube.com/user/Jstall7543
Jstall7543 is offline   Reply With Quote
Old 07-20-2013, 10:44 PM   #195
Tech Elite
 
Jstall7543's Avatar
 
Join Date: Jul 2009
Location: Down Town Olympia
Posts: 3,106
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by SNR Graphite View Post
Thanks for buying my products. Yes I made all that carbon parts for the car
and we use a DM-1 center and motor mount.
You have plans to sell a chassis like that? Or like stock?
__________________
RC is a way of life and a ridiculous hobby.
Ridiculously Fun! Subscribe to my YouTube Channel! Or ELSE! Hehee! http://www.youtube.com/user/Jstall7543
Jstall7543 is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
What 4X4 SCT is this? coaltrain Electric Off-Road 9 10-25-2012 08:23 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:20 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0