RCAmerica/Xray,Hudy
#1
RCAmerica/Xray,Hudy
Hey guys I know Paul has a thread on here. But I wanted to give people a thread if they have a RCAmerica related question somewhere they could come. So here it is.
RCAmerica is the distributor for Xray. Hudy, Max Power. We also carry Jaco,SMC and KoPropo. Any question you have aboutthe line of products or any team stuff can be posted here. We will have updates on product and what races the team will be attending here also.
Thanks Drew
RCAmerica is the distributor for Xray. Hudy, Max Power. We also carry Jaco,SMC and KoPropo. Any question you have aboutthe line of products or any team stuff can be posted here. We will have updates on product and what races the team will be attending here also.
Thanks Drew
#3
Sorry, The Hudy tools have always been like that. They were the first ones to start it. Once you get the hang of it there actully pretty simple.
We will make note of this and pass it on to Hudy.
Thanks Drew
#4
Paul Lemieux will be attending the Timezone Gran Prix.
Timezone Gran Prix
Oct. 8th,9th,10th 2010
Scotty Ernst is the race director
All info can be found at: www.timezoneracing.com
Thanks Drew
Timezone Gran Prix
Oct. 8th,9th,10th 2010
Scotty Ernst is the race director
All info can be found at: www.timezoneracing.com
Thanks Drew
#5
Same as colour identification but without the colours....
#7
Paul and I are coming. We are just running touring and 1/12 open. Monta Hess has been running are car and did very well with it at this years IIC. If you need some setup help post it here and I will get EA on it. Since he is are go to pan car guy.
Thanks Drew
#8
Team EAM
iTrader: (79)
Hey Chuck,
I am going to see if I can get my hands on a WGT car to run some at home and some of the races to help out the Xray guys who are running it. I did help Monte with his at the IIC and he had hands down the best car in the main but made a small mistake that put him back to 10th and still managed to work his way back up to 4th in the main. It was very good!
If anyone else has any pan car questions feel free to ask them here and I'll help as much as I can.
EA
I am going to see if I can get my hands on a WGT car to run some at home and some of the races to help out the Xray guys who are running it. I did help Monte with his at the IIC and he had hands down the best car in the main but made a small mistake that put him back to 10th and still managed to work his way back up to 4th in the main. It was very good!
If anyone else has any pan car questions feel free to ask them here and I'll help as much as I can.
EA
#9
Drew Ellis and Eric Anderson to attend Fall Brawl/Xray Challenge race.:tire:
Oct. 8th,9th,10th 2010
Memphis TN.
You can find more info in there thread under MSRA Memphis, Fall Brawl/Xray Challenage.
Thanks Drew
Oct. 8th,9th,10th 2010
Memphis TN.
You can find more info in there thread under MSRA Memphis, Fall Brawl/Xray Challenage.
Thanks Drew
#10
R/C Tech Elite Member
iTrader: (66)
It's for quick identification when on your bench surrounded by loads of stuff. If you want to quickly grab a driver you don't want to have to spin the driver round to see the size. 2 big lines and a small line will be 2.5mm. Can't get simpler than that really.
Same as colour identification but without the colours....
Same as colour identification but without the colours....
#11
#13
Drew, are you guys going to be able to make KoPropo Race at WestCoast raceway, on OCT 2,and 3rd ?
#14
Thanks Drew
#15
I know this is the on-road thread, but will xray ever come out with a 1:10 off-road buggy?