Xray T4 '13
#2821
Tech Regular
iTrader: (1)
Hi,
If i put the track width spacers shown in the T4 manual (i.e. RR 0.75mm each side front 0mm) on my T3'12 chassis, will the trackwidth be the same...or is the T4 chassis drilled differently?
Does anyone know what the centre of the pin to centre pin measurements are RR and FR on the T4?
And lastly...
Is the trackwidth of the kit T4 the same as the Hagberg mod that a lot of people did on the T3'12?
Cheers guys, i'm just getting myslef confused and need some help lol!
Best,
Chris
If i put the track width spacers shown in the T4 manual (i.e. RR 0.75mm each side front 0mm) on my T3'12 chassis, will the trackwidth be the same...or is the T4 chassis drilled differently?
Does anyone know what the centre of the pin to centre pin measurements are RR and FR on the T4?
And lastly...
Is the trackwidth of the kit T4 the same as the Hagberg mod that a lot of people did on the T3'12?
Cheers guys, i'm just getting myslef confused and need some help lol!
Best,
Chris
On the XRAY web page for the T4 they say that the RF holders have been moved inboard by 0.75mm each side (very close to Hagberg mod). Using these and some figures from the Exotek XR3'12 page, i THINK that the RR trackwidth (centre of pin to centre of pin) of the T4 is 44.5mm and the RF is 40mm...I would appreciate confirmation if possible though.
Thanks.
#2822
I think I've found the answer...
On the XRAY web page for the T4 they say that the RF holders have been moved inboard by 0.75mm each side (very close to Hagberg mod). Using these and some figures from the Exotek XR3'12 page, i THINK that the RR trackwidth (centre of pin to centre of pin) of the T4 is 44.5mm and the RF is 40mm...I would appreciate confirmation if possible though.
Thanks.
On the XRAY web page for the T4 they say that the RF holders have been moved inboard by 0.75mm each side (very close to Hagberg mod). Using these and some figures from the Exotek XR3'12 page, i THINK that the RR trackwidth (centre of pin to centre of pin) of the T4 is 44.5mm and the RF is 40mm...I would appreciate confirmation if possible though.
Thanks.
#2824
Hi,
If i put the track width spacers shown in the T4 manual (i.e. RR 0.75mm each side front 0mm) on my T3'12 chassis, will the trackwidth be the same...or is the T4 chassis drilled differently?
Does anyone know what the centre of the pin to centre pin measurements are RR and FR on the T4?
And lastly...
Is the trackwidth of the kit T4 the same as the Hagberg mod that a lot of people did on the T3'12?
Cheers guys, i'm just getting myslef confused and need some help lol!
Best,
Chris
If i put the track width spacers shown in the T4 manual (i.e. RR 0.75mm each side front 0mm) on my T3'12 chassis, will the trackwidth be the same...or is the T4 chassis drilled differently?
Does anyone know what the centre of the pin to centre pin measurements are RR and FR on the T4?
And lastly...
Is the trackwidth of the kit T4 the same as the Hagberg mod that a lot of people did on the T3'12?
Cheers guys, i'm just getting myslef confused and need some help lol!
Best,
Chris
This is why the T4 uses 0.75mm shims at the rear to get 3deg toe in, while the T3'12 uses 1.5mm to get 3deg toe.
So the T4 is part way towards the 'Hagberg mod' which if I recall, was 1mm narrower.
Skiddins
#2826
Xray doesn't usually do too many drastic mid year changes. They release a new TC around every October, so your choice is buy a T4 now, which is still a great car, or wait 7 months for the T4 '14 or whatever.
#2829
which motor mounts are you guys using?
Seems like this is the only one that will fit?
http://www.ebay.com/itm/Yeah-Racing-...item4aba57e8e4
Seems like this is the only one that will fit?
http://www.ebay.com/itm/Yeah-Racing-...item4aba57e8e4
#2830
oops double post
#2832
Tech Fanatic
iTrader: (7)
which motor mounts are you guys using?
Seems like this is the only one that will fit?
http://www.ebay.com/itm/Yeah-Racing-...item4aba57e8e4
Seems like this is the only one that will fit?
http://www.ebay.com/itm/Yeah-Racing-...item4aba57e8e4
E
#2833
What are you guys thoughts on pro setups where people are running very light shock oil? (for example in the 250cst range front and back)
Just curious on the feedback. I'm running the stock setup at the moment (350cst) and don't think I like the feel of the rear progressive springs. Does not feel consistent for me. Ordered the 2.5 spring to put in the rear and going to try it out. I know a lot of the setups call for 2.7 all around but I'm worried about twitchiness combined with soft oil.
Just curious on the feedback. I'm running the stock setup at the moment (350cst) and don't think I like the feel of the rear progressive springs. Does not feel consistent for me. Ordered the 2.5 spring to put in the rear and going to try it out. I know a lot of the setups call for 2.7 all around but I'm worried about twitchiness combined with soft oil.
#2835