R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 01-11-2013, 11:05 AM   #751
Tech Champion
 
SteveM's Avatar
 
Join Date: Aug 2001
Location: Ottawa, Ontario, CANADA
Posts: 5,909
Trader Rating: 128 (100%+)
Default

Quote:
Originally Posted by handiman View Post
Just bought a S1 and n the midst of assembling.
Ran a T3 11' prior.
A couple of questions,
1) Anyone has limited travel or rather stiff (vertically)front and rear arms with e standard 50mm shafts and recommended tie rods lengths? If so, what is the recommended remedy?
2) I seem to have problems securely a shock cap tightly on one of my shocks. Anyone has issues? Recommended or suggested remedy?
3) Read that some of u use additional flange bearings 5x8x2.5..improved fit and performance?
4) Recommended to run with some slop in the front and rear arms or fill the gaps with spacers?

Appreciate your inputs.
Thanks.
I had a shock cap split and maybe you're having a similar issue.

I've bought the flanged bearings but haven't used them yet.

I have forward/backeard slop on one front suspension arm more than any other that I cannot explain. I've swaped arms and reset the hinge pin carriers, but still have the same issue.
SteveM is online now   Reply With Quote
Old 01-11-2013, 04:07 PM   #752
Tech Addict
 
Luke Hobson's Avatar
 
Join Date: Jul 2005
Location: newark, nottinghamshire, UK
Posts: 526
Send a message via MSN to Luke Hobson
Default

The slop in the arms is where the 0.1/0.2/0.3mm shims come in great like I've reccomened in the past.

I tighten all the blocks up, see how much play there is, then full with shims until there is almost none (literally 0.1 play) just enough for it to drop under its own weight and be free, and if its slightly stiff still, with the damper off, give both the front and the back of the arm a few taps with the handle of your 2.0 driver, that'll free it up.

An easy fool proof method to getting the arms right
__________________
Luke Hobson
Awesomatix - Xenon - Godzilla Paint - Moorespeed - ToniSport - MBmodels

http://luke-hobson.blogspot.com/
Luke Hobson is offline   Reply With Quote
Old 01-12-2013, 04:57 AM   #753
Tech Addict
 
reichsmarshal24's Avatar
 
Join Date: Nov 2011
Location: Maranello, Italia
Posts: 503
Trader Rating: 6 (100%+)
Default

Hey guys, I'm about to get an S1 for our local 17.5 blinky club here in Manila.
What's a good baseline FDR for asphalt. And what spur/pinion combo should I use for it?
__________________
[F104 V2 Pro][F103 RM][Spec-R S1]
[Sanwa MT4][Simple Green][Mountain Dew][SkyFlakes]
reichsmarshal24 is offline   Reply With Quote
Old 01-12-2013, 09:07 AM   #754
Tech Elite
 
jeff jenkins's Avatar
 
Join Date: Oct 2006
Location: Snohomish, WA
Posts: 3,920
Trader Rating: 74 (100%+)
Default

Just a heads up the tamiya steel gear set for there gear diff does not work for the r1.
jeff jenkins is online now   Reply With Quote
Old 01-12-2013, 04:58 PM   #755
Tech Addict
 
trickd122's Avatar
 
Join Date: Jun 2006
Posts: 509
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by reichsmarshal24 View Post
Hey guys, I'm about to get an S1 for our local 17.5 blinky club here in Manila.
What's a good baseline FDR for asphalt. And what spur/pinion combo should I use for it?
For most motors 4.0FDR is a good baseline. Keep temps 160 degrees or lower to be safe, and running a fan will allow you to gear lower. Remember bigger track smaller FDR smaller track bigger fdr
__________________
TEAM MAGIC "making my competition disappear"
trickd122 is offline   Reply With Quote
Old 01-13-2013, 02:56 AM   #756
Tech Elite
 
jeff jenkins's Avatar
 
Join Date: Oct 2006
Location: Snohomish, WA
Posts: 3,920
Trader Rating: 74 (100%+)
Default

well just got home from a club race and tried all kinds of different things on the car and have come up with my best setup yet . i ended up with a much more consistent easy to drive fast car that i could point and shoot with. very happy with the performance from my main event race . I will have the setup posted hopefully after i wake up later. but a hint is 1.5mm sway bar up front and 1.1mm in the rear. yokom pink and blue springs. 1mm higher roll center on lower arm mounts in the front with 1deg of anti dive. front arms all the way back. 3mm front uptravel and 4mm rear uptravel. holy sheet is it good! i will have a link posted later for a pdf setup sheet for everything i ran.
jeff jenkins is online now   Reply With Quote
Old 01-13-2013, 05:03 AM   #757
Tech Adept
 
HK416's Avatar
 
Join Date: Dec 2009
Posts: 216
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by HK416 View Post
Should be in my hands by next week, will let you know soon. Should solve the problem of placing the spacers that take a lot of time !
Ok, using the white spur Bush now but you need to file the bushes a bit if not it will bind the bearings a bit otherwise it's all good now.
__________________
RC FOR FUN, NOT STRESS.
HK416 is offline   Reply With Quote
Old 01-13-2013, 04:12 PM   #758
Tech Elite
 
jeff jenkins's Avatar
 
Join Date: Oct 2006
Location: Snohomish, WA
Posts: 3,920
Trader Rating: 74 (100%+)
Default

Link to my setup. http://www.petitrc.com/reglages/spec...le20130112.pdf
jeff jenkins is online now   Reply With Quote
Old 01-13-2013, 05:07 PM   #759
Tech Initiate
 
Join Date: Dec 2012
Posts: 40
Default

-.-

Last edited by SpecRC; 01-13-2013 at 10:12 PM. Reason: Stupid ipad doesnt show workings...zzz
SpecRC is offline   Reply With Quote
Old 01-13-2013, 05:55 PM   #760
Tech Adept
 
Fuzzi0n's Avatar
 
Join Date: Oct 2012
Location: Northants, UK
Posts: 139
Default

Quote:
Originally Posted by SpecRC View Post
Jeff the page you uploaded looks blank?
By any chance are you using Firefox? If so, go Options>Applications and change .pdf files to open with acrobat/reader rather than previewing in the browser.

Otherwise just right click, save as then open with adobe reader or whatever application you use to view .pdf files and it'll work fine.
__________________
Spec-R S1, Schumacher CAT SX3 S1
Fuzzi0n is offline   Reply With Quote
Old 01-13-2013, 07:20 PM   #761
Tech Addict
 
reichsmarshal24's Avatar
 
Join Date: Nov 2011
Location: Maranello, Italia
Posts: 503
Trader Rating: 6 (100%+)
Default

Will Kawada spur gears fit with the Spec R S1 adaptors? If not, what 64p brands do you guys use?
http://www.rcmart.com/kawada-s6496t-...Path=1293_1308

Thanks.
__________________
[F104 V2 Pro][F103 RM][Spec-R S1]
[Sanwa MT4][Simple Green][Mountain Dew][SkyFlakes]
reichsmarshal24 is offline   Reply With Quote
Old 01-13-2013, 09:43 PM   #762
Tech Regular
 
toast.'s Avatar
 
Join Date: Jun 2011
Location: So Cal
Posts: 454
Trader Rating: 13 (100%+)
Default

ive heard good things about Kimbrough spurs

http://www.tqrcracing.com/shop/produ....asp?p_id=1366
__________________
Small Tires:TA05 v2, M05-Pro, TT01, RC18's
Big Tires: SSC "Slash" LCG, Mugen MBX6 eco SCT, RB5, RB6
toast. is offline   Reply With Quote
Old 01-14-2013, 02:02 AM   #763
Tech Regular
 
spencehotbodies's Avatar
 
Join Date: Dec 2009
Location: London
Posts: 266
Default

Hello guys
Just an up date on the car after a couple of outings. Was at my local club yesterday ( Wlrc ), a small turn out which was a shame, but it was very cold. I have been running lukes indoor set up with only change being Hpi silver springs fitted front and back. All can say is the car was so good in low temp conditions. I was running an old set of sorex 28s.

The next thing I will be trying is a set of t-shocks, should have them fitted before I race again.
spencehotbodies is offline   Reply With Quote
Old 01-14-2013, 02:29 AM   #764
Tech Apprentice
 
Join Date: Aug 2010
Posts: 94
Default Setup for TITC 2013

Hi Guys...

I'm finally pull the triger on purchasing this car...

Anyway i'll be using it for this coming TITC Race on february...
I'll be going to play 13.5 open brushless...

So any of you guys have a good setup for the start on this layout...

Thanks
__________________
Tamiya M05 Pro, Spec-R R1, F104 Pro V2 and AE FT SC10 4x4
Hobbywing V3, Just Stock and SCRT Pro Sanwa MT4
k4mp4q is offline   Reply With Quote
Old 01-14-2013, 08:09 AM   #765
Tech Addict
 
handiman's Avatar
 
Join Date: Jan 2007
Location: Singapore
Posts: 526
Trader Rating: 11 (100%+)
Default Spec-R R1

Quote:
Originally Posted by reichsmarshal24 View Post
Will Kawada spur gears fit with the Spec R S1 adaptors? If not, what 64p brands do you guys use?
http://www.rcmart.com/kawada-s6496t-...Path=1293_1308

Thanks.
The Kawada gears fit fine.
handiman is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Team Losi JRXS Type-R Andrew Gray Electric On-Road 13440 Yesterday 08:58 PM
2012 R.O.A.R Carpet Nationals andrewdoherty Electric On-Road 774 04-04-2012 03:26 PM
JR R1 Pro w/ case for sale... Sorcerer001 R/C Items: For Sale/Trade 7 12-10-2004 11:44 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:36 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net