RSD XRAY, Tamiya and TOP Upgrades
 

We have been looking at expanding our product line lately into other brands. While we are not going to go fully into development as we did with the TC6, we are looking to come out with a few choice upgrades for these very popular TC's.

Starting off we have some XRAY Goodies just released today,

https://reflexracing.3dcartstores.co...ges/rsd052.jpg

RSD XRAY T3 Hard Bumper

https://reflexracing.3dcartstores.co.../RSD052_02.jpg

https://reflexracing.3dcartstores.co.../RSD052_03.jpg

https://reflexracing.3dcartstores.co.../RSD052_04.jpg

https://reflexracing.3dcartstores.co...sd046or_01.jpg

RSD046-OR RSD Shock Spacer Washers

https://reflexracing.3dcartstores.co...sd046or_02.jpg


https://reflexracing.3dcartstores.co...sd046or_03.jpg

Below are Items already available:

https://reflexracing.3dcartstores.co...ges/rsd011.jpg

RSD011 RSD Sway Bar Collars

https://reflexracing.3dcartstores.co...ges/rsd012.jpg

RSD012 RSD Soft Bladders


Now for the TOP Photon:

https://reflexracing.3dcartstores.co...sd046rd_01.jpg

RSD046-RD RSD Shock Spacer Washers (Red)

UPCOMING:

-RSD Captured Pin DCJs for XRAY
-RSD Spool Cups for Top Photon
-RSD Battery Mount System for XRAY
-RSD Battery Mount System for Top Photon

As always, if you guys have any requests or ideas, post away.

I almost forgot,

https://reflexracing.3dcartstores.co...ges/rsd053.jpg

RSD053 RSD Hard Blank Front Bumper

Feeling a little left out over here in the Tamiya camp. What chassis' are you planning on upgrades for?

Good looking stuff CT. Those DCJ's are going to be awesome. No more lost pins or messing with shrink wrap or vinyl tape for me!

I'm ready for yokomo parts!

We are planning on some parts for the 417, TOP and XRAY at the moment.

The Yokomo is still not on the map though, sorry

Hopefully a us distributor will pop up so it can be on the map.

i like that bumper blank..

Same here, but I'd prefer a precut one for the 417. What can I say, I'm lazy.:D

Well, if the bumpers have good acceptance we will look into making them for the other models. We have a 417 on the way for testing purposes so maybe I can come up with a template for the blanks in the meantime for that car.

A template would be great. Hopefully they take off. I know an entire group that will be buying your blanks and precut bumpers.

It only takes a few min with a dremel to drill the 4 necessary holes...

I refer you to my above comment about my laziness.

RSD056 RSD Battery Hold Down System for XRAY

https://reflexracing.3dcartstores.co.../RSD056-07.jpg