Team CRC Xti 1/12th Scale!!
|
|||
#107
Cars all buttoned up got to work out my electronics
#108
Is that a shorty pack or standard?
Thanks
E
Thanks
E
#111
#112
What retains the battery from sliding forward in the event of heavy front impact?
#113
#115
My rctech batteries don't have the shelf molded into them.
I would like to see a real plastic bumper on the main chassis, or maybe a piece of plastic angle mounted under the antenna on top of the upper plate that curls forward and over.
I would like to see a real plastic bumper on the main chassis, or maybe a piece of plastic angle mounted under the antenna on top of the upper plate that curls forward and over.
#116
Receiver/speedo will be in front of the bat too. Set it up right and it shouldn't go anywhere.
#117
Tech Champion
Well remembering back to my EV10 days...I had a number of times where the battery broke through the holder and took out the receiver in front of it...But I suspect with today's LiPos being so much lighter that this will not be an issue. Plus you can always wrap a piece of strapping tape around it pretty easily.
#119
#120