Associated RC 12 R5.2
#1134
Whoops. Ignore this.
#1138
https://www.tqrcracing.com/shop/prod....asp?p_id=2865
Leave a little flashing on them and they fit nice and snug.
#1139
#1140
help with setup problems
I'm having trouble getting the car to be smooth and less twitchy. I have changed the car to run a transverse battery by using the pivot assembly and upper deck from a 12r6. Only other change is the shock, using a one from a 12r6.
We run on CRC black carpet and I'm using the CRC spec tire. The car is not easy to drive and likes to lift the rear inner wheel. Its so responsive just breathing on the steering makes it react hard.
I have tried a soft setup like Keven H but it seems to make it even more aggressive. Soft side springs and heavy tube lube (20k) make the rear wheel lift problem even worse. I was running the dynamic caster block at 10deg and changed it to 5deg, this was the only adjustment which made the car somewhat easy to drive. I have no idea why a soft rear setup is not helping. A fellow racer has a CRC car running soft setup and the car is super smooth to drive.
Attached is my current setup that is somewhat driveable. I hope someone can see something I missed. The only thing I was thinking was to remove the 1mm lower arm spacer and make the front end narrower. I have also tried a high amount of steering expo and turning down the dual rate.
We run on CRC black carpet and I'm using the CRC spec tire. The car is not easy to drive and likes to lift the rear inner wheel. Its so responsive just breathing on the steering makes it react hard.
I have tried a soft setup like Keven H but it seems to make it even more aggressive. Soft side springs and heavy tube lube (20k) make the rear wheel lift problem even worse. I was running the dynamic caster block at 10deg and changed it to 5deg, this was the only adjustment which made the car somewhat easy to drive. I have no idea why a soft rear setup is not helping. A fellow racer has a CRC car running soft setup and the car is super smooth to drive.
Attached is my current setup that is somewhat driveable. I hope someone can see something I missed. The only thing I was thinking was to remove the 1mm lower arm spacer and make the front end narrower. I have also tried a high amount of steering expo and turning down the dual rate.