YOKOMO Touring Car BD-7
#3556
Hy guys sorry for the off topic post but what your bd-7 top deck fit on an ae 6.2?
#3557
he DHI setup has a narrow front with 3.5's go to 4.2's
#3558
Try stock short horn that came with kit or one of similar length. I am positive you will say the car understeers with it. It has a feeling similar to negative exponential from the fact that you will have to add more EPA for the servo to reach full steering lock. This is what a lot of people have tried around here and liked.
#3559
Are the Aluminum Belt Teansion Adjust Cams included in the bd7 2014 (blue) as in the demo pictures? Or plastic?
#3560
My BD7 2014 black edition came with the plastic cam holders, so I would say the blue will be the same.
#3561
How is the 2014 wrking on carpet, the few ive seen and driven were not very good
#3563
The few that ive seen have no rear traction
#3566
Do the BD7 2013 suspension mounts fit the 2014 version? They have different part numbers. Thx!
#3567
I'm getting the 2014 blue version, which of the many new suspension mounts should I get? I want to have some options when setting up. Thx!
#3568
#3569
Tech Initiate
#3570
Tech Fanatic
iTrader: (20)
I wouldn't say you "need" anything really. Most people run the graphite arms pretty much everywhere, they come included with the black version but not the blue one.
It seems to be hit and miss wether or not you get the floating servo mount, but I'd class that as a "nice to have" rather than absolute essential.
There is a short shock conversion available now, it's aimed at curing grip roll (I read reducing grip) so not necessary if you don't normally suffer grip roll, or if you normally run in low grip conditions.
It seems to be hit and miss wether or not you get the floating servo mount, but I'd class that as a "nice to have" rather than absolute essential.
There is a short shock conversion available now, it's aimed at curing grip roll (I read reducing grip) so not necessary if you don't normally suffer grip roll, or if you normally run in low grip conditions.