Eliminating Static Electricity
03-02-2005, 07:16 PM
#1
Eliminating Static Electricity
What do you guys do (if anything) to prevent your EP car from creating a static field?
When I run on asphalt, the car builds such a charge that it becomes a dirt magnet.
I know you can just use compressed air to blow it clean,
but I was wondering if you could do something at the source to reduce the static electricity somewhat?
When I run on asphalt, the car builds such a charge that it becomes a dirt magnet.
I know you can just use compressed air to blow it clean,
but I was wondering if you could do something at the source to reduce the static electricity somewhat?
03-02-2005, 07:49 PM
#2
Tech Addict
they do have those anti static sprays that work real well for clothes. dunno bout rc tho. is it really static that gets the dirt?
03-02-2005, 08:18 PM
#3
Originally posted by greencactus3
they do have those anti static sprays that work real well for clothes. dunno bout rc tho. is it really static that gets the dirt?
they do have those anti static sprays that work real well for clothes. dunno bout rc tho. is it really static that gets the dirt?
Sprays would ruin your electronics unles you sprayed the rolling chassis only.
Problem is, the spray would only last a couple of runs and then you would have to do it again.
I also want to figure it out because it would eliminate shorting out of equipment.
Anybody ever try grounding the car somehow?
03-02-2005, 08:23 PM
#4
Originally posted by scoobydo
What else could it be? The dirt cakes on and stays there. And only on the conductive surfaces.
Sprays would ruin your electronics unles you sprayed the rolling chassis only.
Problem is, the spray would only last a couple of runs and then you would have to do it again.
I also want to figure it out because it would eliminate shorting out of equipment.
Anybody ever try grounding the car somehow?
What else could it be? The dirt cakes on and stays there. And only on the conductive surfaces.
Sprays would ruin your electronics unles you sprayed the rolling chassis only.
Problem is, the spray would only last a couple of runs and then you would have to do it again.
I also want to figure it out because it would eliminate shorting out of equipment.
Anybody ever try grounding the car somehow?
Use denatured alcohol on all your solder joints and you'll notice alot less dirt buildup.
03-02-2005, 08:30 PM
#5
Originally posted by Soviet
I'd say it has more to do with the flux in the solder heating up and becoming sticky when load is applied to our solder joints.
Use denatured alcohol on all your solder joints and you'll notice alot less dirt buildup.
I'd say it has more to do with the flux in the solder heating up and becoming sticky when load is applied to our solder joints.
Use denatured alcohol on all your solder joints and you'll notice alot less dirt buildup.
Maybe I'm wrong, but what else could it be?
03-02-2005, 08:44 PM
#6
Static guard
We have used Static Guard for years when static electricity was as issue...
Just spray a light coating on the entire car (enough to coat but not enough to damage electronics...) and you'll notice less build up of dirt or carpet fuzz. An air compressor is handy though to blow off the remainder.
Just spray a light coating on the entire car (enough to coat but not enough to damage electronics...) and you'll notice less build up of dirt or carpet fuzz. An air compressor is handy though to blow off the remainder.
03-02-2005, 08:48 PM
#7
Re: Static guard
Originally posted by Lebatek
We have used Static Guard for years when static electricity was as issue...
Just spray a light coating on the entire car (enough to coat but not enough to damage electronics...) and you'll notice less build up of dirt or carpet fuzz. An air compressor is handy though to blow off the remainder.
We have used Static Guard for years when static electricity was as issue...
Just spray a light coating on the entire car (enough to coat but not enough to damage electronics...) and you'll notice less build up of dirt or carpet fuzz. An air compressor is handy though to blow off the remainder.
03-11-2005, 03:44 PM
#8
Eliminating Static Electricity
There are a couple of posts covering this, but they pertain to the glitching in the radio when dealing with static, or the RF intererence it causes too. CA Glue the edges of the Carbon chassis. This seals the conductive carbon behind the glue thus eliminating the static build up your getting.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
