3 Racing Sakura D3 CS Drift
#1366
I am selling my NEW D3 roller!
http://www.rctech.net/forum/r-c-item...sakura-d3.html
PM me if interested!
http://www.rctech.net/forum/r-c-item...sakura-d3.html
PM me if interested!
#1367
yay got my SP reventon pro installed flashed with drift firmware set forward/brake/reverse and now I have reverse awesome
#1368
Tech Initiate
Thats good news
#1369
Tech Regular
iTrader: (3)
I ordered my alloy MST hubs and CVDs (MST and R31s)
Also need to start working on my Zero S CS also.
#1370
Tech Addict
iTrader: (21)
I decided to order a Pandora RC Nissan body. I would like to order some wheels at the same time, but am not sure what offsets to get....or if they're different front to rear. Can anyone recommend a good offset that will work well with this body and the D3?
This is the body I'll get. Pandora says it's 196mm(?):
This is the look I'm after (basically wheel flush with the fender lip):
Thanks in advance!
Tommy
This is the body I'll get. Pandora says it's 196mm(?):
This is the look I'm after (basically wheel flush with the fender lip):
Thanks in advance!
Tommy
#1371
Tech Initiate
well it depends on the wheel adapters your using and the width of the guards. in the manual it says 164mm at the front and 162mm at the rear add the wheel adapters +10mm (stock) so if your shell has a width of 188-89mm then you need to make up 12-14mm so dived that in half and that's your offset this was an example so measure your wheel adapters and body width then you know how to work it out
from the previous page...
#1372
Tech Adept
iTrader: (17)
Join Date: Feb 2011
Location: Fighting out of the PHILIPPINES by way of VANCOUVER B.C
Posts: 135
Trader Rating: 17 (100%+)
check my d3 on fb. check my steering angle.
greetings from trece martires city cavite philippines!
https://www.facebook.com/photo.php?f...type=1&theater
greetings from trece martires city cavite philippines!
https://www.facebook.com/photo.php?f...type=1&theater
#1373
Tech Regular
iTrader: (3)
check my d3 on fb. check my steering angle.
greetings from trece martires city cavite philippines!
https://www.facebook.com/photo.php?f...type=1&theater
greetings from trece martires city cavite philippines!
https://www.facebook.com/photo.php?f...type=1&theater
#1374
Tech Apprentice
Hi guys, my steering seems too little free play, is this normal? Please refer to the link of video below, Thanks
youtu.be/PQ_T9kM7xis
youtu.be/PQ_T9kM7xis
#1375
Tech Initiate
#1376
Tech Apprentice
You mean the screw fixed at the wheel arm? But that was the screw should be used showing in the instruction manual, or I should replace with shorter screw?
#1377
Tech Initiate
its really up to you. I'm pretty sure the front holes are for future sway bars, but they arent used for anything else and I currently have my droop screws up front
#1378
Tech Apprentice
#1379
Tech Initiate
I decided to order a Pandora RC Nissan body. I would like to order some wheels at the same time, but am not sure what offsets to get....or if they're different front to rear. Can anyone recommend a good offset that will work well with this body and the D3?
This is the body I'll get. Pandora says it's 196mm(?):
Thanks in advance!
Tommy
This is the body I'll get. Pandora says it's 196mm(?):
Thanks in advance!
Tommy
#1380
I don't know my pandora 370Z is 205mm I run 10mm on the front and 12mm on the rear and 6mm wheel adapters. you need to measure the width at the top of the wheel arches.