3 Racing Sakura D3 CS Drift
#557
#560
bit of double post there lol. that shell looks ok did you see the other shell I was talkin about the pandora 370Z convertible it's a wide body 205mm
rcMart has it for $34 PANDORA (#PAB-006) Nissan Fairlady Z 370Z/Z34
wheel arches trimmed a bit better in this pic
wonder if the belt will fit under the interior
rcMart has it for $34 PANDORA (#PAB-006) Nissan Fairlady Z 370Z/Z34
wheel arches trimmed a bit better in this pic
wonder if the belt will fit under the interior
Last edited by pickled; 11-03-2012 at 09:19 PM.
#562
#564
On a different topic but adhesive related! do you guys use double sided tape to stick your ESC to the chassis? how often do you have to replace it cause I have to replace mine all the time. It gets dirt under the esc and eventually comes loose so I have to replace it with new double sided tape!
check out the paint job on the 370z
Last edited by pickled; 11-04-2012 at 02:10 AM.
#565
Tech Regular
iTrader: (3)
Can you mount it on the bumper of the chassis?
On a different topic but adhesive related! do you guys use double sided tape to stick your ESC to the chassis? how often do you have to replace it cause I have to replace mine all the time. It gets dirt under the esc and eventually comes loose so I have to replace it with new double sided tape!]
On a different topic but adhesive related! do you guys use double sided tape to stick your ESC to the chassis? how often do you have to replace it cause I have to replace mine all the time. It gets dirt under the esc and eventually comes loose so I have to replace it with new double sided tape!]
I was using Velcro...but had enough slack that the angle the ESC goes into makes the fan go louder...I used double sided tape now. works good for me. make sure maybe double up on thickness because of uneven bottom chassis because of that pattern. and use alcohol to wipe down both sides...and let air dry. so mine has stayed and not come off
#566
that's good paint job...
I was using Velcro...but had enough slack that the angle the ESC goes into makes the fan go louder...I used double sided tape now. works good for me. make sure maybe double up on thickness because of uneven bottom chassis because of that pattern. and use alcohol to wipe down both sides...and let air dry. so mine has stayed and not come off
I was using Velcro...but had enough slack that the angle the ESC goes into makes the fan go louder...I used double sided tape now. works good for me. make sure maybe double up on thickness because of uneven bottom chassis because of that pattern. and use alcohol to wipe down both sides...and let air dry. so mine has stayed and not come off
Did you find out if you can mount the intercooler off the chassis bumper?
I think I'll leave the yokomo wanbia and uras mods till I'm a lot better at not hitting things as hard as I do now and maybe get the 370 body to test if it touches the belt. Yeah I just want another shell that's not as banged up as the one I'm currently using lol
Just got my alloy bits and tyres yay gonna open them now and see what they're like
Last edited by pickled; 11-04-2012 at 03:40 PM.
#567
Tech Regular
iTrader: (3)
yeah I clean it up every time I change the tape, I've been thinking of doubling the thickness and pressing it into the hex pattern more!
Did you find out if you can mount the intercooler off the chassis bumper?
Just got my alloy bits and tyres yay gonna open them now and see what they're like
Did you find out if you can mount the intercooler off the chassis bumper?
Just got my alloy bits and tyres yay gonna open them now and see what they're like
just found out I can mount it...didn't even realize it comes with a mount. I didn't read the instructions.
I'll do that next time...I'll work on painting the outside of body at some point.
#568
I installed the yeah racing wheels and they fit heaps better with the angle can lower my body for a hella flush look!
#570
lol here is what it looks like with the yeah racing wheels on it sort of hella flush had to add camber to it now 3*
And this is the vent mod I did for my motor fan
Told you my shell is pretty banged up
Hey Drift mission is getting a forum up and running if anyone is interested in being referred here is a link http://forum.driftmission.com/register
And this is the vent mod I did for my motor fan
With the wheels turned indicating
Told you my shell is pretty banged up
Hey Drift mission is getting a forum up and running if anyone is interested in being referred here is a link http://forum.driftmission.com/register
Last edited by pickled; 11-05-2012 at 04:24 AM.