Yokomo MR4TC-BD
#7936
Guys i hvae heard that a new BD is coming out, anyone have any info or anything like that?>
Jamie
Jamie
#7938
Carpet rubber tires
I am running on a extremely high bite carpet track and I am having some traction roll problems can some one help me.
#7941
its for stick packs part number is in picture
#7942
#7943
#7945
we use that mod on asphalt all the time.
#7947
removing the rear brace and the rear side post gets in a lot of flex.
cutting the topdeck in the front section adds a little extra flex in the front.
cutting the upperdeck in the rear is not that good. tried it already
cutting the topdeck in the front section adds a little extra flex in the front.
cutting the upperdeck in the rear is not that good. tried it already
#7950
Tech Adept
New to BD.
Anyone try the RAYSPEED piston performance differences between the 2 holes & 3 holes?
Question of the 1mm spacers below the suspension mount:
stock setting 7mm front & 6mm rear ride height with 1mm spacers, what if I remove the 1mm spacers and ride height shall still be 7mm & 6mm? Any advantages without the spacers?
I am racing on the low-medium grip track.
Thanks.
Anyone try the RAYSPEED piston performance differences between the 2 holes & 3 holes?
Question of the 1mm spacers below the suspension mount:
stock setting 7mm front & 6mm rear ride height with 1mm spacers, what if I remove the 1mm spacers and ride height shall still be 7mm & 6mm? Any advantages without the spacers?
I am racing on the low-medium grip track.
Thanks.