Yokomo MR4TC-BD
#8206
I was at the Reedy race and Masami did use the new car. It did not look to different from the BD. I think he changed the suspension a little bit.
I had some problems with my car tweeking out on me if I touched anything during the race...I made the C main but I know if I could of made atleast the B if my car would of drove straight...I have only been driving the BD for a month so I am still figuring things out on the car...
I want to Thank Jason C, Edgar, and Butch for all there help during the Reedy Race...
Also I would like to Thank Masami, and his mechanic for helping us set up are cars...Here is the set up..
1.2mm pistons, 500wt oil, hpi silver springs, all around, front shock position 2nd hole from bottom, rear shock position 3rd hole from bottom
Droop 5 in front and 4.5 in rear, 0 degree toe in front, and 3 degree in rear
The roll centers were not raised.. camber 1.5 all around, front ride height 4mm, rear 4.3mm.......1 mm front camberlink, and .5 on rear hub carrier camberlink
Hpi 4 degree caster blocks
I had some problems with my car tweeking out on me if I touched anything during the race...I made the C main but I know if I could of made atleast the B if my car would of drove straight...I have only been driving the BD for a month so I am still figuring things out on the car...
I want to Thank Jason C, Edgar, and Butch for all there help during the Reedy Race...
Also I would like to Thank Masami, and his mechanic for helping us set up are cars...Here is the set up..
1.2mm pistons, 500wt oil, hpi silver springs, all around, front shock position 2nd hole from bottom, rear shock position 3rd hole from bottom
Droop 5 in front and 4.5 in rear, 0 degree toe in front, and 3 degree in rear
The roll centers were not raised.. camber 1.5 all around, front ride height 4mm, rear 4.3mm.......1 mm front camberlink, and .5 on rear hub carrier camberlink
Hpi 4 degree caster blocks
Last edited by King of B Main; 05-27-2008 at 06:03 PM.
#8207
Tech Champion
iTrader: (32)
I was at the Reedy race and Masami did use the new car. It did not look to different from the BD. I think he changed the suspension a little bit.
I had some problems with my car tweeking out on me if I touched anything during the race...I made the C main but I know if I could of made atleast the B if my car would of drove straight...I have only been driving the BD for a month so I am still figuring things out on the car...
I want to Thank Jason C, Edgar, and Butch for all there help during the Reedy Race...
Also I would like to Thank Masami, and his mechanic for helping us set up are cars...Here is the set up..
1.2mm pistons, 500wt oil, hpi silver springs, all around, front shock position 2nd hole from bottom, rear shock position 3rd hole from bottom
Droop 5 in front and 4.5 in rear, 0 degree toe in front, and 3 degree in rear
The roll centers were not raised.. camber 1.5 all around, front ride height 4mm, rear 4.3mm
Hpi 4 degree caster blocks
I had some problems with my car tweeking out on me if I touched anything during the race...I made the C main but I know if I could of made atleast the B if my car would of drove straight...I have only been driving the BD for a month so I am still figuring things out on the car...
I want to Thank Jason C, Edgar, and Butch for all there help during the Reedy Race...
Also I would like to Thank Masami, and his mechanic for helping us set up are cars...Here is the set up..
1.2mm pistons, 500wt oil, hpi silver springs, all around, front shock position 2nd hole from bottom, rear shock position 3rd hole from bottom
Droop 5 in front and 4.5 in rear, 0 degree toe in front, and 3 degree in rear
The roll centers were not raised.. camber 1.5 all around, front ride height 4mm, rear 4.3mm
Hpi 4 degree caster blocks
#8208
thanks bro, All be at vegas !!!!
#8209
Does anyone have any official data form Yokomo about the new car. I want to decide what to do with my BD. Most of what I do depends on when the car will come out. It looks too good for me to pass up!
#8211
Tech Initiate
There's a photo of the car Masami used at the Reedy Race of Champions at http://edseb.smugmug.com/gallery/505...03756957_ze5Z3 ,page 28 if I remember right.Gallery was on the Reedy Race 2008 thread.
#8212
Tech Initiate
Just tried that link, does'nt take you there so go to the "Reedy race 2008 is on" thread and go from there , sorry about that.
#8213
just thought id add the link for some people
http://edseb.smugmug.com/gallery/505...TpL2#303761017
hope that works masami's car is pic 246 which is page 9 outta the 12 matsukuras is the next pic
Is it just me or do I not really see that much change like theres a new topdeck, new rear hubs, steering, arms and suspension mounts but thats mainly the old bd right?
http://edseb.smugmug.com/gallery/505...TpL2#303761017
hope that works masami's car is pic 246 which is page 9 outta the 12 matsukuras is the next pic
Is it just me or do I not really see that much change like theres a new topdeck, new rear hubs, steering, arms and suspension mounts but thats mainly the old bd right?
#8214
I don't believe that the original BD required a complete over haul. The things you listed and the different steering rack were the only parts that people have changed to get more steering and flexibilty in the car.
Just my two cents worth.
I'll be up for the new car when released.
Later
Calvin
Just my two cents worth.
I'll be up for the new car when released.
Later
Calvin
#8215
oh yea dont get me wrong I still think the bd great and im still running it the only things ive done is use the old mr4tc hubs and a trf416 steering rack.
No I was only saying as they had shown a new car at the Lrp masters and at the shizuoka show
No I was only saying as they had shown a new car at the Lrp masters and at the shizuoka show
#8216
On a previous post they are saying that this is a proto-type. I am just happy to see developments on a replacement Yokomo TC, prior to the Worlds later this year.
I am still very happy with my BD's both running the CGM steering modification and the HPI C hub.
Calvin.
I am still very happy with my BD's both running the CGM steering modification and the HPI C hub.
Calvin.
#8219
the arms on the masami car looks like from the CGM, all arms looks alike.
#8220
what kind of shock pistons will fit in the yokomo shocks ?
losi?
associated ?
tamiya ?
losi?
associated ?
tamiya ?