Turtlemaster

pops, or steve, what are the part numbers for the rayspeed bars, i had them somewhere, but can't find them.

Shopkeeper

iTrader: (35)

It list them all, black silver gold copper, as RS 25 in the catalog.

Kingcrab

anyone how many teeth of BD belt?

Bluey_74

iTrader: (5)

Guys, a quick question regarding motor selection.
What do you guys prefer for variable timed 19T motors with Lotsa BALLS for a BIG track, And i mean BIG..

(see link for photos!!)

Any hlp would be appreciated.

http://www.rrcsa.org.au/pics/TrackEx...eb/Track13.jpg


Thanks,

Barger

iTrader: (1)

: Guys ....Won the state titles in stock with my BD..Car handled sweet.Controlled sorex36 tyres,30wt F/r rayspeed red fr/white rear,2 degree rear toe,5mm ride height,1degree camber fr/r,surge motor with 4499 brushes(com cut and new brushes every run in finals)

pops

iTrader: (1)

Fantastic, congratulations! Glad you have confirmed my opinion that firmer springs and 2 deg rear toe works better.

SpeedTech

iTrader: (5)

The number of teeth of the belt I believe is in the part number (although I might be wrong) but that's typically how some manufacture part number their belts now.

Steve Wang

Phil C

Anyone heard any news about an Aeast chassis being made for the bd? Im not getting on very well with the standard chassis and topdeck.
What other aftermarket chassis are there to choose from? and info would be apreciated!
Cheers Phil.

JayBee

iTrader: (31)

Gonna be trying out Shooter's new Alum. spool BTW, has anyone ran a spool with the center one-way? How does the car 'feel'?...

aoizip

iTrader: (1)

Looks nice jaybee...

how does it feel... well.. more steering entering and exiting the corner..
mid corner.. you pushhhhh......

could be my setup...

~Ming...

BTW: where did you get that spool..

highwayman

iTrader: (2)

when you use a spool, do you turn down the dual rate on the car?

JayBee

iTrader: (31)

Thanks Ming... the spools came from www.rcKenon.com

agower

hi,

you can get those spools from www.precisionrc.com.

whilst im here:


was just wondering if the oneway assembly from the original mr4 (zs-640t) fits the sd/bd? wanted to know before i buy one?

heres a picture of the mr4 oneway

thanks
A Gower

Matt Howard

iTrader: (6)

I always turn it up so I have as much steering as possible whenever I run a spool.

forty6

is the front diff of the BD centered? Just wondering if I can use it for a 415.