Hot Bodies Cyclone
how to wire a orion3.5 to a mamba esc.
Super Moderator
iTrader: (239)
Super Moderator
iTrader: (239)
ygpm marcos
Super Moderator
iTrader: (239)
thanks marcos, but what about timing the motor.
Super Moderator
iTrader: (239)
my 10.5 is set at 1mm advanced timing geared at a 4.78FDR and after 8 minutes my motor comes off the track around 170-174 degrees, if you set your power and drag brake on the esc the motor will not get that much hotter than at zero degrees timing
under 80 deg C will ok !
marcos what esc do you run
Super Moderator
iTrader: (239)
Andy Moore & Hara in Jmrca used new type rear ball diff & large diff ring