In case you guys need part numbers - one of the tech guys at Mirage (HB UK distributor) pieced together this info:
I pieced together the parts needed to build a front diff for the Cyclone should anyone want to build one instead of the One-Way:
HPA166 - Thrust Race
HPA165 - Preload Spring
HPZ203 - Washer
HB70715 - Outdrive
HP72105 - Diff Ring
HPZ857 - Washer
HPB020 - Bearing
HPA495 - Diff Pulley
HPA157 or HP75033 - Diff Balls. The latter part number are Ceramic
HP73522 - Diff Screw and T Nut from Hara Pro 4
Other useful bits:
HB70725 - Locked Centre Pulley
(the car comes with a centre one way - may be easier to get than the 415 part, plus the colour matches!
HPZ815 - According to the manual you need to use this washer if you are using a KO servo.
HPA302 - Hard Ball End. They include them for the camber links but not the steering ones.
HPA301 - Hard Ball End. Same as above but for the link from the bellcrank to the servo.
HP30004 & HP50432 - Shock Preload collars and O Rings from the Pro4. The kit collars don't have any provision for an O ring in them. And the Pro4 ones are purple...