Hot Bodies Cyclone
05-30-2006, 09:50 AM
#4127
Pivot Block Sets for Cyclone.
61394 Blue/Surikarn
61395 Black/Standard Cyclone
They come in a set of 6 in 0, 1, 1.5, 2, 2.5, 3 degrees.
Place an order with your local dealer.
61394 Blue/Surikarn
61395 Black/Standard Cyclone
They come in a set of 6 in 0, 1, 1.5, 2, 2.5, 3 degrees.
Place an order with your local dealer.
05-30-2006, 11:22 AM
#4128
Originally Posted by wagonman72
Pivot Block Sets for Cyclone.
61394 Blue/Surikarn
61395 Black/Standard Cyclone
They come in a set of 6 in 0, 1, 1.5, 2, 2.5, 3 degrees.
Place an order with your local dealer.
61394 Blue/Surikarn
61395 Black/Standard Cyclone
They come in a set of 6 in 0, 1, 1.5, 2, 2.5, 3 degrees.
Place an order with your local dealer.
tower hobbies has them they are the same ar the pro4 http://www2.towerhobbies.com/cgi-bin...I=HPIC1187&P=Z
05-30-2006, 02:53 PM
#4130
They haven't shipped to distributors yet. What I am hinting at is you guys need to get them on backorder to get the process going.
Last edited by wagonman72; 05-30-2006 at 04:02 PM.
05-30-2006, 05:28 PM
#4132
I think the problem is that the Cyclone is just too popular!!
All the asian stores are sold out or low on stock due to all the racers running them in asia..
Not sure what the situation is in the US....
Here in Aus... the cyclone is only being run a few people. Not many at all. We struggle to get parts...
All the asian stores are sold out or low on stock due to all the racers running them in asia..
Not sure what the situation is in the US....
Here in Aus... the cyclone is only being run a few people. Not many at all. We struggle to get parts...
05-31-2006, 02:41 AM
#4135
How much weight are you guys running to balance the car?
I need more than 30g on the battery side!!!
This is err... strange. Normally it's the non-battery side that needs more weight.
Then again, the Novak BL is quite heavy...
FYI - i'm running spectrum, Novak 4.5, standard Hitec servo...
3800's on the otherside..
I need more than 30g on the battery side!!!
This is err... strange. Normally it's the non-battery side that needs more weight.
Then again, the Novak BL is quite heavy...
FYI - i'm running spectrum, Novak 4.5, standard Hitec servo...
3800's on the otherside..
05-31-2006, 05:13 AM
#4137
Originally Posted by AngryAsian
How much weight are you guys running to balance the car?
I need more than 30g on the battery side!!!
This is err... strange. Normally it's the non-battery side that needs more weight.
Then again, the Novak BL is quite heavy...
FYI - i'm running spectrum, Novak 4.5, standard Hitec servo...
3800's on the otherside..
I need more than 30g on the battery side!!!
This is err... strange. Normally it's the non-battery side that needs more weight.
Then again, the Novak BL is quite heavy...
FYI - i'm running spectrum, Novak 4.5, standard Hitec servo...
3800's on the otherside..
05-31-2006, 04:42 PM
#4138
Tech Fanatic
Originally Posted by rc-zombies
I see Tower finally listed the Hara and Surikarn edition cars...
but..what's up with them not carrying any cyclone parts
that's pretty poor parts support for cars they're selling...
but..what's up with them not carrying any cyclone parts
that's pretty poor parts support for cars they're selling...
05-31-2006, 04:51 PM
#4139
Originally Posted by tc3 racer sc
THEY SAID A WHILE BCK THERE WILL NOT STOCK THE PARTS WHEN THE CAR FIRST CAME OUT
contact Dave at B and B hobbies in Hudson Florida 1-727-862-4849, he stocks alot of the Cyclone parts
05-31-2006, 05:37 PM
#4140
Originally Posted by Marcos.J
what parts do you guys need? The only parts that I had replaced on that car is the front steering knuckle, which i got from my local hobby store (hpi pro 4 part) most of the suspencion parts you can get directly from hpi
contact Dave at B and B hobbies in Hudson Florida 1-727-862-4849, he stocks alot of the Cyclone parts
contact Dave at B and B hobbies in Hudson Florida 1-727-862-4849, he stocks alot of the Cyclone parts