R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 11-29-2005, 04:57 PM   #1996
Tech Master
 
ngo8's Avatar
 
Join Date: Apr 2003
Location: Winnipeg Manitoba Canada
Posts: 1,263
Send a message via ICQ to ngo8
Default

Quote:
Originally Posted by pro4_chris
i ran the car on carpet with foams and used hara's set up apart from 1 spring rate less front and back and the car is awsome
yeah i am using xray 35/30 and 50w/40w and the front block i kept it stock cause 0 degree is waaay to much steering other than that that set up is a good start .
__________________
Xray|ORCA|Sanwa|Trinity|KoPropo
ngo8 is offline   Reply With Quote
Old 11-29-2005, 05:12 PM   #1997
Tech Master
 
nordheim's Avatar
 
Join Date: Jun 2005
Location: Puyallup, WA
Posts: 1,725
Trader Rating: 6 (100%+)
Default

Anyone running stock out there? What setup are you using for asphalt?
__________________
SEATTLEINDOORRACEWAY.COM - VALLEYVIEWRC.COM
nordheim is offline   Reply With Quote
Old 11-29-2005, 06:47 PM   #1998
The Evicerator
R/C Tech Elite Subscriber
 
Join Date: Sep 2001
Location: Irvine, CA
Posts: 4,142
Default

Does anyone have a link as to where I can order some TIR CVDs and spools in the US?

PM me please?
__________________
Steve Weiss
TEAM ASSOCIATED -- REEDY -- SANWA -- PROTOFORM -- P1 BRAND -- TUNING HAUS -- TEAM KINWALD -- TEAM STEVE INTERNATIONAL
Steve Weiss is offline   Reply With Quote
Old 11-29-2005, 07:22 PM   #1999
Tech Master
 
nordheim's Avatar
 
Join Date: Jun 2005
Location: Puyallup, WA
Posts: 1,725
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Evicerator
Does anyone have a link as to where I can order some TIR CVDs and spools in the US?

PM me please?
not available in the US yet as far as I know. I ordered mine from RcModel in Hong Kong. Didn't take very long.
__________________
SEATTLEINDOORRACEWAY.COM - VALLEYVIEWRC.COM
nordheim is offline   Reply With Quote
Old 11-29-2005, 07:26 PM   #2000
Tech Master
 
nordheim's Avatar
 
Join Date: Jun 2005
Location: Puyallup, WA
Posts: 1,725
Trader Rating: 6 (100%+)
Default

Here is my toy. Still missing the purple motor/battery wires. Should be here tomorrow though.
Attached Thumbnails
Hot Bodies Cyclone-dscn3189.jpg   Hot Bodies Cyclone-dscn3190.jpg   Hot Bodies Cyclone-dscn3194.jpg  
__________________
SEATTLEINDOORRACEWAY.COM - VALLEYVIEWRC.COM
nordheim is offline   Reply With Quote
Old 11-29-2005, 07:49 PM   #2001
Tech Master
 
ngo8's Avatar
 
Join Date: Apr 2003
Location: Winnipeg Manitoba Canada
Posts: 1,263
Send a message via ICQ to ngo8
Default

Quote:
Originally Posted by Evicerator
Does anyone have a link as to where I can order some TIR CVDs and spools in the US?

PM me please?
just get them from there website its very easy and they ship fast and show you items in stock HKRCODEL sometimes doesnt have them in stock .
http://www.titaniumracing.com
__________________
Xray|ORCA|Sanwa|Trinity|KoPropo
ngo8 is offline   Reply With Quote
Old 11-29-2005, 08:18 PM   #2002
The Evicerator
R/C Tech Elite Subscriber
 
Join Date: Sep 2001
Location: Irvine, CA
Posts: 4,142
Default

Thanks guys!
__________________
Steve Weiss
TEAM ASSOCIATED -- REEDY -- SANWA -- PROTOFORM -- P1 BRAND -- TUNING HAUS -- TEAM KINWALD -- TEAM STEVE INTERNATIONAL
Steve Weiss is offline   Reply With Quote
Old 11-29-2005, 09:16 PM   #2003
Tech Master
 
nordheim's Avatar
 
Join Date: Jun 2005
Location: Puyallup, WA
Posts: 1,725
Trader Rating: 6 (100%+)
Default

shipping from the UK is a lot more as I was about to order directly from them. I got mine from RcModel. However send a private message to HKRCMODEL before ordering. They can confirm whether the item is in stock or not.
__________________
SEATTLEINDOORRACEWAY.COM - VALLEYVIEWRC.COM
nordheim is offline   Reply With Quote
Old 11-29-2005, 10:06 PM   #2004
Tech Fanatic
 
tc3 racer sc's Avatar
 
Join Date: Jul 2003
Location: lancaster sc near charlotte nc
Posts: 921
Default

Quote:
Originally Posted by pucho
I started with the stock set up and made somw changes, I am using ASS gold spring on the front, ASS silvers in the rear, added 1/2deg of camger in the rear, added droop to the front (from 7 to 5 on the gauge) added 1mm under rear upper ball end, and used the 1.2 mm swaybar. that seamed to do it for me. I am running with diffs and a looked center pully. The next thing I and going to try is rasing the front pivot blocks and playing around with the roll center maybe eaven some anti dive. Hope this helps.

Luis
what up luis u see i added the hara setup i got from the nats i think it the same one u had in ur hands b4 i lft cya reggie
__________________
hotbodies cyclone, hotbodies tcxx orca v3 esc
tc3 racer sc is offline   Reply With Quote
Old 11-29-2005, 10:22 PM   #2005
Tech Elite
 
Bob-Stormer's Avatar
 
Join Date: Dec 2001
Location: Glasgow, Montana USA
Posts: 3,512
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by danjoy25
Does anyone have the part # of the steel driveshaft for the front and which shop sells them?
Here is the part # HOT61043
__________________
www.stormerhobbies.com "Where the world shops for radio control."
www.facebook.com/stormerhobbies
www.twitter.com/stormerhobbies

looking for....vintage 1/10-1/12 pan, need Schumacher 1/12th cars and parts.
Bob-Stormer is offline   Reply With Quote
Old 11-30-2005, 03:47 AM   #2006
Tech Fanatic
 
pucho's Avatar
 
Join Date: Jan 2003
Location: Central, FL
Posts: 804
Send a message via AIM to pucho
Default

Quote:
Originally Posted by Evicerator
Does anyone have a link as to where I can order some TIR CVDs and spools in the US?

PM me please?
Steve: try Adrian at Shumaker USA they are the TIR importer in the us. I got mime from HK.

Reggie: I didn't wan't to start with that because like someone mentioned their setups ate sometimes way out or left field to me, plus how am I going to learn anything about the car is I don't do my own thing.
pucho is offline   Reply With Quote
Old 11-30-2005, 05:53 AM   #2007
Tech Champion
 
AdrianM's Avatar
 
Join Date: Aug 2001
Location: Tampa, FL
Posts: 5,914
Trader Rating: 4 (100%+)
Default

Hi Guys...

We have Spools and CVD's on order with TiR. They should be here within the next week or two. We are just waiting for TiR to ship them to us.
__________________
Adrian Martinez
What I run: Schumacher Mi5/Associated RC10R5.1/Associated RC12R5.2/Futaba/HobbyWing/Team EA Motorsports/BSR Racing
Where I run: Florida Indoor R/C Complex/Thunder Racing/Florida On Road State Series
AdrianM is offline   Reply With Quote
Old 11-30-2005, 10:13 PM   #2008
Tech Fanatic
 
tc3 racer sc's Avatar
 
Join Date: Jul 2003
Location: lancaster sc near charlotte nc
Posts: 921
Default

Quote:
Originally Posted by pucho
Steve: try Adrian at Shumaker USA they are the TIR importer in the us. I got mime from HK.

Reggie: I didn't wan't to start with that because like someone mentioned their setups ate sometimes way out or left field to me, plus how am I going to learn anything about the car is I don't do my own thing.
ur right luis ur right
__________________
hotbodies cyclone, hotbodies tcxx orca v3 esc
tc3 racer sc is offline   Reply With Quote
Old 11-30-2005, 10:43 PM   #2009
Tech Master
 
ngo8's Avatar
 
Join Date: Apr 2003
Location: Winnipeg Manitoba Canada
Posts: 1,263
Send a message via ICQ to ngo8
Default

hey did you guys see the XRAY cyclone its a silver version hehehe
__________________
Xray|ORCA|Sanwa|Trinity|KoPropo
ngo8 is offline   Reply With Quote
Old 11-30-2005, 10:48 PM   #2010
Tech Addict
 
Join Date: May 2005
Location: HKG
Posts: 638
Default

yes
like 415MSX
Attached Thumbnails
Hot Bodies Cyclone-001_1133406714.jpg   Hot Bodies Cyclone-001_1133406831.jpg  
HKRCMODEL is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hot Bodies Cyclone S wardyl Electric On-Road 4 10-01-2008 07:01 AM
Hot bodies Cyclone 12 k7king R/C Items: For Sale/Trade 1 09-04-2008 07:09 AM
WTB Hot Bodies Cyclone/ cyclone Parts tenpins77 R/C Items: Wanted to Buy 0 07-29-2008 07:48 AM
Hot Bodies Cyclone sdt1 Australia For Sale/Trade 6 07-13-2008 02:05 AM
WTB: Cyclone S/Cyclone Painted bodies vazzo Australia Wanted to Buy 0 02-05-2008 05:15 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 03:45 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net