M.J

iTrader: (3)

Hey guys i got a problem.

I am using a novake cyclone and a 11 single and xs3 and when i axellerate it straight away goes flat out the is nothing between stop and full speed.

What do i do.

PLEASE HELP ME !!!!!!!!!!!

schmelme

iTrader: (13)

Your lacking some grammar in your post but do you mean the throttle is full soon as you touch the trigger?

M.J

iTrader: (3)

Yer basically.

Flat out straight away

Thanks




grammar who cares!!

mo

iTrader: (7)

It probably just needs to be reset to the radio.

StephenSobottka

iTrader: (8)

People who would like to help you with your problems care about the grammar. If we can't understand what you are typing, we can't help you.

jackfast

Your doing fine with your grammar man, just try to give us as many details as possible in your post so we can help you troubleshoot the problem. Is your ESC deffective? Also, as mentioned, please check your radio trim settings, and reset your speed control according to the manufacturer's instructions.
Good luck with your problem, and if anything else happens, be sure to ask again for help.
-jack-

StasI

i know the answer to this question i had the same problem here

1) turn on your transmitter
2) leave your car off
3) press the scroll key until "TDB" appears on the screen
4) on the screen it should show L/F if you press the throttle and R/B if you brake its set on R/B
5)Press the decrease key until the current value is on 0% ( on L/F)
6) after that set up your ESC again and thats it your readdy for run

HOPE THIS HELPS

jackfast

Awesome! Looks like the problem might be solved. Let us know if that worked.

M.J

iTrader: (3)

Cheers guys

Thanks for all your help

My speedie was set on a different profile and my controller needed a bit of slight programming

Cheers again

M.J

jackfast

No worries mate!
-Cheers-

StasI

anything to do with this radio I know it