View Poll Results: what's your tire choice?
Protoform
46
30.67%
HPI
104
69.33%
Voters: 150. You may not vote on this poll
U.S. Vintage Trans-Am Racing Part 2
#587
Tech Champion
iTrader: (2)
I was hoping that SEVTA would become the GCS of Trans Am, but since I'm not currently able to do it myself, I am not holding out much hope.
For those of you who dont know, GCS is an offroad series in GA where one scoring system and race administration team holds a points series at different tracks around the state. I am thinking more like a 3 to 6 state series depending on who we can get in on it.
But for now SEVTA will remain one race one place.
For those of you who dont know, GCS is an offroad series in GA where one scoring system and race administration team holds a points series at different tracks around the state. I am thinking more like a 3 to 6 state series depending on who we can get in on it.
But for now SEVTA will remain one race one place.
#588
Tech Elite
iTrader: (9)
Only 1 of these left. Who wants it? HPI 1969 Camaro Z28 Sprint 2 Sport, 90% Ready for USVTA Racing
__________________________________________________ ___________________
---->http://www.rctech.net/forum/texas-ra...obby-shop.html
__________________________________________________ ___________________
---->http://www.rctech.net/forum/texas-ra...obby-shop.html
#593
#594
Tech Elite
iTrader: (9)
__________________________________________________ ___________________
---->http://www.rctech.net/forum/texas-ra...obby-shop.html
#595
That's one sweet looking '70 Boss 302 Mustang! I can't wait to see it up close on Sunday. My car will have the Shelby GT-350 body in standard white with blue stripes.
__________________________________________________ ___________________
---->http://www.rctech.net/forum/texas-ra...obby-shop.html
__________________________________________________ ___________________
---->http://www.rctech.net/forum/texas-ra...obby-shop.html
#597
Tech Elite
iTrader: (1)
The stock link will only let it go into the ball cup 3mm per side with 0 deg toe with .5mm sweep on the arms. The stock knuckles and links would be fine as the angle is different from the new.I can get full throw lock to lock at 32 deg with out the shocks on, put the shocks on and its down to 28 when the rim hits the lower spring bucket with the shock mounted full in at position 4.
The other thing was re-shimming the DCJ's and longer spool cups. Good thing I talked with Colin before starting the build, otherwise I would have been out of luck.
#598
Tech Rookie
This great cars
#599
Guys im going to run VTA with a TC4 Club Racer and a 200mm body
Is the difference between these two wheels that the top one is actually 31 plus 6mm in the hex to make it wider or just because of the 31mm width over the 8 spoke 31mm
http://www.amainhobbies.com/product_...k-2-6mm-Offset
http://www.amainhobbies.com/product_...-Wheel-White-2
Thanks For any of the help you guys can give
-Zane
Is the difference between these two wheels that the top one is actually 31 plus 6mm in the hex to make it wider or just because of the 31mm width over the 8 spoke 31mm
http://www.amainhobbies.com/product_...k-2-6mm-Offset
http://www.amainhobbies.com/product_...-Wheel-White-2
Thanks For any of the help you guys can give
-Zane
#600
Tech Champion
iTrader: (2)
Guys im going to run VTA with a TC4 Club Racer and a 200mm body
Is the difference between these two wheels that the top one is actually 31 plus 6mm in the hex to make it wider or just because of the 31mm width over the 8 spoke 31mm
http://www.amainhobbies.com/product_...k-2-6mm-Offset
http://www.amainhobbies.com/product_...-Wheel-White-2
Thanks For any of the help you guys can give
-Zane
Is the difference between these two wheels that the top one is actually 31 plus 6mm in the hex to make it wider or just because of the 31mm width over the 8 spoke 31mm
http://www.amainhobbies.com/product_...k-2-6mm-Offset
http://www.amainhobbies.com/product_...-Wheel-White-2
Thanks For any of the help you guys can give
-Zane