100 mph break with my Kyosho Gt
#1
100 mph break with my Kyosho Gt
Hy ( sorry for my very very bad english , i'm french )
My name is Yoann and i want break 100 mph with my kyosho GT 1/8
My best speed to date is 83 mph with this setup :
MMM 2200kv
5S 5000mah 45C
Xtra Soft GRP Rally Tires
pinion 30 /spur gear 44 ( mod 1)
Front diff oil 80 000 / center 100 000 / back 30 000
ESC
Timing is on Highest ( max )
Brake is at 30%
Cutoff Voltage: Auto LiPo
Punch no limited
Drag Brake 20%
radio system 2,4Ghz
The car is very stable in my runs but the speed is no good ...
My timing is bad ? my gears are they bad ? or there is something else?
Thanks for reading, and I appreciate any help that anyone can give .
Good luck
PS : this forum is amazing !!!!!
My name is Yoann and i want break 100 mph with my kyosho GT 1/8
My best speed to date is 83 mph with this setup :
MMM 2200kv
5S 5000mah 45C
Xtra Soft GRP Rally Tires
pinion 30 /spur gear 44 ( mod 1)
Front diff oil 80 000 / center 100 000 / back 30 000
ESC
Timing is on Highest ( max )
Brake is at 30%
Cutoff Voltage: Auto LiPo
Punch no limited
Drag Brake 20%
radio system 2,4Ghz
The car is very stable in my runs but the speed is no good ...
My timing is bad ? my gears are they bad ? or there is something else?
Thanks for reading, and I appreciate any help that anyone can give .
Good luck
PS : this forum is amazing !!!!!
#3
I also bought a nano-tech Turnigy 6S 5000mAh 90C Lipo ~ 45, I hope it will go!
Timing is on Highest ( 20 ) or pinion 30 /spur gear 44 ( mod 1) it is a good setting ?
#5
#6
Tech Adept
Center spool, you dont need a diff for speed runs.
Kyosho has the titanium diff pins -http://www.igthobbies.com/KYOSHO-KYOVZW211-TITANIUM-DIFFERENTIAL-SHAFTS_p_1655.html
I am not sure what body your running but I would look for the most aerodynamic as possible
http://www.igthobbies.com/GT1-BODIES_c_203.html
#8
thank you for having responded to me
my diameter of tires is 95mm
my internal gear ratio is 43/13
and i run to 300m
my body is a Protoform PF8-GT
THANK FOR YOUR HELP NIC YOU ARE THE BEST
my diameter of tires is 95mm
my internal gear ratio is 43/13
and i run to 300m
my body is a Protoform PF8-GT
THANK FOR YOUR HELP NIC YOU ARE THE BEST
#10
my motor is a 2200kv and not a 2650kv
The 2200 is built to run in 6S
The 2200 is built to run in 6S
#11
one other thing, turn off lipo cutoff. you should be making only a couple runs at a time. you will pick up speed . I do alot of speed running with 1/10th scale.
#12
I also drag my cancel drag break and got my timing at 0 .
my maximum speed to 5S is 130kmh ( 80 mph )