Team Much-More cell master v1
#1322
Originally Posted by A. Rhodes
The magnetic temp sensor
#1324
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Hey Andy on the 42's what are you setting the run out at...........say like 4700? Manual says 10% or so over the mah of the pack.
Thanks
Brian
Damn its nice to have the MM stuff again.
Thanks
Brian
Damn its nice to have the MM stuff again.
#1325
Tech Elite
iTrader: (32)
Originally Posted by wyd
Hey Andy on the 42's what are you setting the run out at...........say like 4700? Manual says 10% or so over the mah of the pack.
Thanks
Brian
Damn its nice to have the MM stuff again.
Thanks
Brian
Damn its nice to have the MM stuff again.
CTX Step 1 - 0-3000 6.5A
CTX Step 2 - 3000-3200 6.5A
CTX Step 3 - 3200-5000 6.5A - 50 temp - peak from 15 to 27 depending on ambient temp
Repeak @ 6.5A linear, peak detect 10, temp off
Using the step profile as a linear charge will give you a long lockout time.
#1326
Tech Elite
iTrader: (32)
Originally Posted by Centerfire
Hi Guys,
What is the right Charge Settings for GP3700 Matched using MM Cellmaster? is it Linear or Step Charging? Thanks!
What is the right Charge Settings for GP3700 Matched using MM Cellmaster? is it Linear or Step Charging? Thanks!
Step 1
3000mA 7.0A
Flex off
Step 2
3030 0.2A
Flex off
Step 3
5000mA
Modified: 4.0A 19t/Stock 5.5-6.0A
Flex off
Temp 48
delta peak 06
#1327
Step Charging
Hi,
I've got one of these chargers but have never used the step charging function.
What benefits will I see for charging my 1)gp 3300/3700 and 2)ib4200s for use in stock and 19t classes.
From what I gather from this thread, no need to step charge the IB4200s (Charge at 6A linear)
and there may be some benefits to step charging the GPs (??help).
Also fail safe cut-off temp. is 120 degF. for both GPs and IBs.
Please confirm.
I've got one of these chargers but have never used the step charging function.
What benefits will I see for charging my 1)gp 3300/3700 and 2)ib4200s for use in stock and 19t classes.
From what I gather from this thread, no need to step charge the IB4200s (Charge at 6A linear)
and there may be some benefits to step charging the GPs (??help).
Also fail safe cut-off temp. is 120 degF. for both GPs and IBs.
Please confirm.
#1328
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Thanks Andy.
#1329
Tech Regular
iTrader: (6)
Originally Posted by A. Rhodes
You can use either charging profile for you 37's. Below is the profile from the Nexus site for step charging 37's:
Step 1
3000mA 7.0A
Flex off
Step 2
3030 0.2A
Flex off
Step 3
5000mA
Modified: 4.0A 19t/Stock 5.5-6.0A
Flex off
Temp 48
delta peak 06
Step 1
3000mA 7.0A
Flex off
Step 2
3030 0.2A
Flex off
Step 3
5000mA
Modified: 4.0A 19t/Stock 5.5-6.0A
Flex off
Temp 48
delta peak 06
Thank you sir! i needed that!
#1334
Tech Addict
iTrader: (12)
Originally Posted by hierog
a few new items added to the collection!! the second box is another Rheinhard edition - i haven't broken the seal yet on that one!!
Thanks Arun and Nexus Racing!
vic
Thanks Arun and Nexus Racing!
vic