Team Much-More cell master v1
#646
Problem with Cell master
My Cellmaster shows 0.310 V for a 6-cell battery pack and stops after a few seconds charging with low cell. I've tried all my packs and the error occurs with all. I've also checked the thin wires for current detection and run a few resets.
Can anyone help?
It's a bit urgent because we have the german nationals in 10 days time :-(
Can anyone help?
It's a bit urgent because we have the german nationals in 10 days time :-(
#647
Originally Posted by brandbrainz
My Cellmaster shows 0.310 V for a 6-cell battery pack and stops after a few seconds charging with low cell. I've tried all my packs and the error occurs with all. I've also checked the thin wires for current detection and run a few resets.
(
(
#648
Tech Lord
iTrader: (26)
temp probe magnet
Ryan, Keith or James...
Do you guys have any plans to modify the existing temp probe so that it can be placed within a magnet? the team orion advantage temp probe is efficiently designed with the temp probe inside a magnet. and the magnet is curved so it sits perfectly on top of a cell. it'd be a good "hop-up" for the charger. just thought and curious. thanks!
Keith... see you at nats! when are you arriving?
- Chris
Do you guys have any plans to modify the existing temp probe so that it can be placed within a magnet? the team orion advantage temp probe is efficiently designed with the temp probe inside a magnet. and the magnet is curved so it sits perfectly on top of a cell. it'd be a good "hop-up" for the charger. just thought and curious. thanks!
Keith... see you at nats! when are you arriving?
- Chris
#649
Yeah it's pretty cool hop up but we been using our temp sensor just fine.
here is the big question how are we gonna use the round magnet sensor with battery heatsink?
here is the big question how are we gonna use the round magnet sensor with battery heatsink?
Originally Posted by Hebiki
Ryan, Keith or James...
Do you guys have any plans to modify the existing temp probe so that it can be placed within a magnet? the team orion advantage temp probe is efficiently designed with the temp probe inside a magnet. and the magnet is curved so it sits perfectly on top of a cell. it'd be a good "hop-up" for the charger. just thought and curious. thanks!
Keith... see you at nats! when are you arriving?
- Chris
Do you guys have any plans to modify the existing temp probe so that it can be placed within a magnet? the team orion advantage temp probe is efficiently designed with the temp probe inside a magnet. and the magnet is curved so it sits perfectly on top of a cell. it'd be a good "hop-up" for the charger. just thought and curious. thanks!
Keith... see you at nats! when are you arriving?
- Chris
#650
Originally Posted by TeamMuchMore
Yeah it's pretty cool hop up but we been using our temp sensor just fine.
here is the big question how are we gonna use the round magnet sensor with battery heatsink?
here is the big question how are we gonna use the round magnet sensor with battery heatsink?
Originally Posted by Ryan Lee
#651
Tech Lord
iTrader: (26)
Originally Posted by TeamMuchMore
Yeah it's pretty cool hop up but we been using our temp sensor just fine.
here is the big question how are we gonna use the round magnet sensor with battery heatsink?
here is the big question how are we gonna use the round magnet sensor with battery heatsink?
i was just gonna get the magnet container..and throw that around the MMR temp sensor until i get my heatsinks. *hint* *hint*
btw.. James, you coming down for nats also?
#652
False Peak on CellMaster
I experienced false peak at the start of charging with Linear Charge function. Delta peak set at 0.05, charge rate 5A, 3300 GP matched batteries. While with Turbo 35 or ProTrak, I don't encounter this problem.
Anybody can help? Thanks in advance.
Anybody can help? Thanks in advance.
#653
Originally Posted by Piyo Piyo
I experienced false peak at the start of charging with Linear Charge function. Delta peak set at 0.05, charge rate 5A, 3300 GP matched batteries. While with Turbo 35 or ProTrak, I don't encounter this problem.
Anybody can help? Thanks in advance.
Anybody can help? Thanks in advance.
The MMR super linear current does not require high delta peak settings. The battery can false peak in linear mode if the battery has been trayed or dead-shorted.
In CTX mode, the battery will not false peak, because it is locked against delta peak in the first two phases.
If you use regular linear mode, you should set the long lockout. The setting for the long lockout is in the main setup menu (hold down "<" for three seconds). After you start charging, then hold down ">" to activate the lockout. You will see the key pop up on the screen. During lockout, the charger will still peak if the battery temp reaches your set temp cutoff.
Or, you can set up a CTX profile with 5A in all three phases...5A to 2500mah, 5A to 2600mah, and 5A to 4500mah. This will still be a linear charge, but makes it so you do not have to set a long lockout .
Last edited by Nexus Racing; 08-24-2005 at 09:16 AM.
#654
Ive just recenlty purchaced a Team Much More Cell Master Charger the problem Im having is that when im in the step 2 mode the charger will charge a little bit and then it willstop charging and it will do this over and over till I get a Error message check clip Do I have this setup wrong or is there a defect with the charger my setup is
Step 1
2650 ma 7.0a
Flex off
Step 2
2680ma 0.2a
Flex off
4200ma 6a
Flex off
delta peak 09
It does it every time it goes to step 2
your help would be greatly appreciated
Im using 3300 Dead shorted batteries
Step 1
2650 ma 7.0a
Flex off
Step 2
2680ma 0.2a
Flex off
4200ma 6a
Flex off
delta peak 09
It does it every time it goes to step 2
your help would be greatly appreciated
Im using 3300 Dead shorted batteries
#655
Just another questions (perhaps already answered somewhere in this thread..). I have set peakdetection at 8mv. Is the peakdetection per cell or per 6-cell pack?
#656
Originally Posted by noline
Ive just recenlty purchaced a Team Much More Cell Master Charger the problem Im having is that when im in the step 2 mode the charger will charge a little bit and then it willstop charging and it will do this over and over till I get a Error message check clip Do I have this setup wrong or is there a defect with the charger my setup is
Step 1
2650 ma 7.0a
Flex off
Step 2
2680ma 0.2a
Flex off
4200ma 6a
Flex off
delta peak 09
It does it every time it goes to step 2
your help would be greatly appreciated
Im using 3300 Dead shorted batteries
Step 1
2650 ma 7.0a
Flex off
Step 2
2680ma 0.2a
Flex off
4200ma 6a
Flex off
delta peak 09
It does it every time it goes to step 2
your help would be greatly appreciated
Im using 3300 Dead shorted batteries
I don't think that it is possible for the CM to flex charge at only .2A, so it cuts the charge off.
#657
Originally Posted by TDO
Just another questions (perhaps already answered somewhere in this thread..). I have set peakdetection at 8mv. Is the peakdetection per cell or per 6-cell pack?
#658
Maybe allready asked & answered but:
1) is the cutoff voltage when discharging for the pack or per cell?
2) is it possible to discharge and then charge in a cycle ones instead of charge and discharge?
1) is the cutoff voltage when discharging for the pack or per cell?
2) is it possible to discharge and then charge in a cycle ones instead of charge and discharge?
#659
Originally Posted by Nexus Racing
8mV (a setting of 08) is for the entire pack, no matter how many cells .