Originally posted by Guo Chean
Hi James Kim,
does any good setting for GP 3300 SP2 and Sanyo 3600HV setting for step charge mode. i need some run time and a bit punch for my ep. thanks
for gp3300 Hara Profile at DHI
1/3 2500mAh ,7.0a flex 0
2/3 2530mAh, 0.2a flex 0
3/3 3900mAh, 4.0a flex 0 ,
delata Peak 00 Temp Cut 47deg, repeak 1 time
Repeak Delay 5Min Repeak Amp 4.0a, Repeak Capacity 300mAh
I assume that this setting is for hot weather setting. if the temperature is not so high like Thailand you can use the 03-05 delta peak value.
CTX-CHG Surikarn Profile for gp 3300
1/3 0000mA 4.0A Fn Fantemp n 6cell
2/3 2400mA 4.0A Fn
3/3 4000mA 4.0A Tn 'cuttemp n' 'deltapeak 00' R1
Repeak Dly 2:00 Repeak Cap 250
I do not have too much experience with sanyo cells.
these charging settings can be very diffrent from place to place.