Team Much-More cell master v1

[Casper]

That is correct. The Cell master only does per pack so you may want to turn down the delta peak for 4 cell charging.

[nikkiesteban]

At my LCD the letter D when discharging & letter C when charging at my cell master are slowly fading. what do you think is the cause?

[Big B]

Originally Posted by nikkiesteban

At my LCD the letter D when discharging & letter C when charging at my cell master is slowly fading. what do you think is the cause?

Could be the is that the only one? What size power supply are you using? Has it been dropped or damaged at all?

[nikkiesteban]

Originally Posted by Big B

Could be the is that the only one? What size power supply are you using? Has it been dropped or damaged at all?

never dropped.. I'm powering the charger using battery of the car 12v... what do you think? where i can get a replacement for LCD? how much?

[Big B]

If it is still under warranty I would send it in for repair, hard to say what the problem is and why it is only the C and D, try getting a hold of someone at MMR through their website

[nikkiesteban]

i think someother lines in the LCD are slowly fading.

[m8commando]

Originally Posted by nikkiesteban

i think someother lines in the LCD are slowly fading.

Are you guys having LCD problems.....I found replacement 16x2 LCD's.....3 different colors to choose from easy to change out......for $14.95 you can have a nice display and not have to deal with Much More customer service, the post office or time waiting and wondering when your much more product will be back to you, due to LCD problems! Check it out....


http://www.sparkfun.com/commerce/cat...s.php?cPath=76


I got hooked uuuuuup!

[nikkiesteban]

Originally Posted by m8commando

Are you guys having LCD problems.....I found replacement 16x2 LCD's.....3 different colors to choose from easy to change out......for $14.95 you can have a nice display and not have to deal with Much More customer service, the post office or time waiting and wondering when your much more product will be back to you, due to LCD problems! Check it out....


http://www.sparkfun.com/commerce/cat...s.php?cPath=76


I got hooked uuuuuup!

can i put it in my ctx-c? how about the connectors for the LCD?

[m8commando]

Yes all much more LCD's are the same 16x2.

The connectors you will have to unsolder from the old LCD and put on the new LCD....it's really easy to do...

[Centerfire]

Hi Guys,

I just want to ask whats the best charge settings (linear and step charging) for a new pack EASTPOWER 4200 using Cellmaster? Thanks!

Regards!

[Big B]

Here is what I use, I dont set any value the capacity (reason, most batts peak alot higher than the # on the side, by setting it at 0 they have a natural peak instead of stopping a at certain #) I set the amps between 5 and 7, Delta peak I set at 14, this setup works really well, I have never had a faulse peak with it.

[A. Rhodes]

I set my CTXC at:

6-8 A charge
47-51 temp cut - depends on ambient temp
5000mah capacity
21 peak detect - inside
14 peak detect - outside w/ heatsink

As for step, most tend to stay away from step charging with the new IB's, not 100% sure how it will work with EP cells. When I did use the step feature, I would use it a linear (all three steps the same) which allows the charger to use a very long lock out.

[Centerfire]

A. Rhodes : Thanks! what do you mean 14 peak detect outside w/ heat sink? how will i set that?

Big B : THanks! How's the punch of the battery using 14 peak detect?

[Big B]

Originally Posted by Centerfire

A. Rhodes : Thanks! what do you mean 14 peak detect outside w/ heat sink? how will i set that?

Big B : THanks! How's the punch of the battery using 14 peak detect?

I think he means outdoors (that one caught me offguard too). As for the Punch, it is great.

[Centerfire]

Big B : Ok! i'll try it this weekend on the tracks, are you using EASTPOWER 4200 too? if you do, what is the highest peak do you reach on those batts?