A Ilievski

iTrader: (39)

Not glueing the CF components?

Davin

iTrader: (43)

Did the chassis plate slapped the towers on for a quick picture.

entitymugenmtx

iTrader: (85)

That's what I have been doing for the last 2 days

Davin

iTrader: (43)

2 days to build a gear diff / spool and put 8 screws in?? And here I thought i was taking my time

entitymugenmtx

iTrader: (85)

loll... good one.

pcar951

iTrader: (23)

I'm all for cutting that wart off the left side of the chassis, using only the inner servo mount and tape or shoe goo to hold the servo in place.We did it on our Yokomo's, kept that nub from dragging through the sweepers...

Any thoughts??

Serpent Lover

iTrader: (5)

Here is what i have so far after 6 hours or so.

B4james

iTrader: (13)

Check your top deck as it looks like you have put it on upside down, the cut outs near the spur gear should be facing down over the bearings.

Serpent Lover

iTrader: (5)

Good eyes man, you are correct i just flipped it over thanks a million.

B4james

iTrader: (13)

No probs,

yokemad

hi all
What weight shock oil you guys using nowadays with 13.5T motor on med-high carpet???
Cheers

jgraham37128

iTrader: (25)

Just finished 10+ hours but it's ready to race now. Balanced to perfection...

JG

Davin

iTrader: (43)

Whens OFNA gonna make an Orange car stand. You have Schumacher purple Ive got Tamiya/Associated blue. How about a little love for Xray

Serpent Lover

iTrader: (5)

I agree, hahahahahah. Anyhow just need the Shocks and Finished, here is what i did today. This KIT ROCKS. Love how the build went, the only bump on the road was the servo saver set-up, but after reading thru here i got it done in seconds.

Meradin

iTrader: (19)

How do you get your tires to look like that? I have searched/read almost every tire sanding thread out there and all I can end up with is a tire with grooves/scratches in it and I can still see the seam! I am using fine grit paper too!