sagejyoung

Hi,

i use sorex on asphalt - this weekend at a club meeting for the heats i ran sweep tyres - ok they were old etc i found the car to be unpredictable for the mains i changed to a set of sorex and there was an immediate difference. the sorex tyres were as old and had just as much track time at the sweeps did but wow what a difference it made. i also made sure i did the same prep routine for each set to minimize differences. i can now say sorex are the answer for consistency and we all know what consistency means in RC.

Kensei

Which spur gear to use for FDR 3.0 to 4.5/5.0?

I know how many teeth.

I need to know what brand.

The XRay spurs don't go that low (I think...)

EAMotorsports

iTrader: (79)

That was actually Alex's 2nd car. His other car does have the prototype servo mount on it. The only reason it wasnt on this car was that he didnt have a 2nd mount.

I have one on my car now and it does work. You can see the chassis flex under the servo with it installed. I wont know if I can tell a difference on the track till I run here at home though as I installed it over there and I couldnt really tell much of anything on that carpet. Although I did go faster after installing it (But changed a lot of other stuff too so dont know what caused the increase in speed).

EA

CarbonJoe

In mine, I use an Xray 96 tooth to get to a 3.8 FDR for 17.5 blinky. Xray makes a 96 and a 92.

syndr0me

iTrader: (32)

I want to pick up some aftermarket CVD's for the front of the car to use during mod practice so I don't bend my ECS. Who makes some that are durable? I see CSO makes some in tempered steel and spring steel. Any thoughts on which would stand up to more abuse?

Fred Hubbard

iTrader: (6)

There isn't anything that would not bend when hit with the right amount of force and on the right angle.

EAMotorsports

iTrader: (79)

Some guys over at ETS were running the new Spec R ones and they really liked them. They could possibly bend as Fred said but they do not fall apart or break like previous versions.

EA

syndr0me

iTrader: (32)

I'm just looking for something that might be slightly less prone to bending, and not $50 per bend. I'm not very good at mod.

Also, how you liking that Exotek conversion? I miss me some toe blocks.

Fred Hubbard

iTrader: (6)

LOL about the blocks, me really likey the conversion But like EA said the V2 Spec-R's are made well and I like the idea of the clips instead of set screws.

syndr0me

iTrader: (32)

Hmm, yeah, those look nice. Anybody in the US carry them?

ByteStream

iTrader: (2)

RW Racing - down to 72T 64P
Xenon - down to 88T 64P

noline

Hey Guy's just picked up a Xray T3 2012 running 13.5 blinky. on med bite asphalt Track w Solara hard compound tires. I've been running it box stock for now just so I can get the feel of the car.Need some setup advice. I need more entry steering what changes should I make?

Thanks

defcone

iTrader: (15)

do the blocks change handling?

Fred Hubbard

iTrader: (6)

TQRCRaceway Out of Stock

Speedtechrc Out of Stock

HKShobby.com In Stock

Fred Hubbard

iTrader: (6)

I meant to mention to you a while back when we first saw the Tamiya DCJ's at TITC and forgot but you realize they are made by Spec-R.