Pedro 51

Peter

spacendeman

sanding the chassis plate is done.. now taking my time to build up the car
I think the hmx will be shipped shortly!

idbdoug

iTrader: (41)

They will come with ball diff and spool in front. HMX's may be here before Christmas or sooner. This information is from Corally USA phone conversation,their website is a little outdated. Call them or email Rob at Corally USA
idbdoug

weekendracer_uk

Corally gear diff expected Jan 2012

http://www.corally.co.uk/

spacendeman

That is good news!

Holmenkollen

Parts needed to re-align the pulleys?

Uziman

iTrader: (2)

Yes as they have installed a Modeltech rear gear diff conversion. So that required some modification to the pulleys.
I would say the official corally one will drop straight in with no modification.
I just hope it will fit the '09 as well.

Roedor

Can anyone put a setup to start for rubber tyres and asphalt?

Thank you

spacendeman

I don't have it yet. Here is now everybody driving indoor.
I still need to built it off.. almost done.

SNIPR

iTrader: (12)

10.27.2010 is last news release so i would say "little" is an understatement...

spacendeman

Almost finished my Corally HMX!







Sorry for the crappy phone pictures.. but better pictures coming soon!

rokosam

Nice photos and nice car!!!

Those dampers... they seem to have too much preload, isnīt?

spacendeman

HI,

I do need to work on the car.. but these are just pictures to show

weekendracer_uk

Looking good so far

Holmenkollen

Have started my build. Some impressions:

- High quality stuff, top finish on the parts
- The upper deck is a tight fit, I had to file it a little. Not to CA-glue the upper deck is a smart idea.
- My TA05 gear diffs drops right in, just flip the bearing holders and use 189 mm rear belt instead of 186 mm.
- The shock towers are nice but if you want more angle on the shocks use Phi 07 shock towers (not 09 towers).
- Dampers are really nice
- You can use some short pinions but long pinions are the best choice.
- The flex is way better than the 09 car, the same as Tamiya, Xray, Yokomo.

Will test this weekend!