V-Dezign Carpet Ripper V
http://www.v-dezign.net/Kotisivukone...2756&id=141598
http://www.v-dezign.net/Kotisivukone...2756&id=141598 http://www.v-dezign.net/Kotisivukone...2756&id=141598 http://www.v-dezign.net/Kotisivukone...2756&id=141598 http://www.v-dezign.net/Kotisivukone...2756&id=141598 http://www.v-dezign.net/Kotisivukone...2756&id=141598 Pictures from the updated website : http://www.v-dezign.net/carpet-ripper-v2 |
I've seen the prototypes. Very nicely made car and super quick too.
Not cheap, but everything in the kit is top spec and no hop ups are needed. Trev |
vdezign costs
In the Uk this costs 320 euros delivered, but has every hop up known to man.
|
:ha:mine is ordered...:p
I'm driving V-dez from 2007 Have CR 07; 2.0; 4.0 & V on the way...:sneaky: Best cars I ever run, great support, super bloke to deal with Nilez |
Originally Posted by Nilezb
(Post 9531933)
:ha:mine is ordered...:p
I'm driving V-dez from 2007 Have CR 07; 2.0; 4.0 & V on the way...:sneaky: Best cars I ever run, great support, super bloke to deal with Nilez Vesa always willing to help me out loads of great tips and setup advice |
I'd like one but as I haven't run my CR4 it'll have to wait a while :cry:
What parts if any would you need to fit the CR4 to bring it up to same spec as the CR-V? |
Nice looking kit.
|
Originally Posted by CFR
(Post 9532227)
I'd like one but as I haven't run my CR4 it'll have to wait a while :cry:
What parts if any would you need to fit the CR4 to bring it up to same spec as the CR-V? v4 and v5 are very different the chassis is massively different, the rear pod in v4 is same geometry but slight difference in construction The chassis is now longer yet thinner |
would that dampner system work on the R5 or do you make a converson
|
Hi guys,
From CR 4.0 following parts are compatible for CR V: - bumper plate - tubes - cross brace standoffs Versions coming after CR V will have again option to be upgraded with minimum qty parts to the latest one. The reason for many changes in pods and some other parts is to get pods optimized for current lipo racing and to get them for better for "mass production". Spares will be available well during the season of course, complete kits will just be a limited edition and according to kits ordered with some extras of course. Rear end is re-designed as motor is a bit more to right and motor pods are also new. Later this year there will be an upgrade kit for CR 4.0 users for needed alum and graphite parts which will be announce later on after complete kits are available in october. Pre-orders are taken in still for few days to get all to the list of limited edition of complete kits (delivered in october). Act fast if you wanna to get yours! :) my email is at the website www.v-dezign.net There will be more news and updates on the website in couple of weeks. @Blue Screw: tubes will fit as they are but it just needs a new cross brace and top plate for the pod. If lots of interest is shown for those, maybe there will be a conversion. |
Your new car looks great Vesa. Congrats.
Take care.-Bruce |
Thanks Bruce! Thanks also all the people who have been cheering during the project!
|
Most of the parts for the limited editon of kits are ordered, expect to get all here and packed during october like planned. Still some kits available from this unique batch, email me if interested!
|
Like Bruce said car does look great, good job!
|
Great looking car, so many cool new kits I might have to add a wing to the museum :)
|
All times are GMT -7. It is currently 03:52 AM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.