Ta04r...
#1306
Regional Moderator
With my Monster Stock, I'm using a 128/37-36 combo - FGR of 7.39 or 7.57
#1307
Tech Rookie
Hi
I don't have a TA-04R but I have just bought a TA-04S ! Everything is great, looks a nice design etc but there is a mechanical speed controller included ..... but no information in the manual how to fit it
If anyone has a TA-04 with a mechanical speed controller (I know they are rubbish but it's all I have and I want to use it for now!) could you PLEASE post a picture of how/where it is fitted?
Or a scan of the construction manual page where the diagram is? My manual is for "TA-04S Chassis Kit" and all it shows is the fitting of an ESC but there is a mechanical one in the box !
Thanks in advance !
I don't have a TA-04R but I have just bought a TA-04S ! Everything is great, looks a nice design etc but there is a mechanical speed controller included ..... but no information in the manual how to fit it
If anyone has a TA-04 with a mechanical speed controller (I know they are rubbish but it's all I have and I want to use it for now!) could you PLEASE post a picture of how/where it is fitted?
Or a scan of the construction manual page where the diagram is? My manual is for "TA-04S Chassis Kit" and all it shows is the fitting of an ESC but there is a mechanical one in the box !
Thanks in advance !
#1308
There must be a manual with your M.S.C. bag.
#1309
Tech Adept
TA04-TRF with Carbon Lower Deck?
Hi,
I am running a TA04R, and as I priced all the hop-ups that I may need later, I've noticed that I may be better off with purchasing a new TRF version from LHS and run it with Carbon Lower Deck(part 53494) for TCS GT2 class and possibly GT1 next season. Does anyone try this yet? Does carbon lower deck will fit with TRF version? like new Front One-Way, SSG decks, new front stablizer and so on.
Thanks,
J.
I am running a TA04R, and as I priced all the hop-ups that I may need later, I've noticed that I may be better off with purchasing a new TRF version from LHS and run it with Carbon Lower Deck(part 53494) for TCS GT2 class and possibly GT1 next season. Does anyone try this yet? Does carbon lower deck will fit with TRF version? like new Front One-Way, SSG decks, new front stablizer and so on.
Thanks,
J.
#1311
Tech Elite
iTrader: (27)
Re: TA04-TRF with Carbon Lower Deck?
Originally posted by KrispyK
Hi,
I am running a TA04R, and as I priced all the hop-ups that I may need later, I've noticed that I may be better off with purchasing a new TRF version from LHS and run it with Carbon Lower Deck(part 53494) for TCS GT2 class and possibly GT1 next season. Does anyone try this yet? Does carbon lower deck will fit with TRF version? like new Front One-Way, SSG decks, new front stablizer and so on.
Thanks,
J.
Hi,
I am running a TA04R, and as I priced all the hop-ups that I may need later, I've noticed that I may be better off with purchasing a new TRF version from LHS and run it with Carbon Lower Deck(part 53494) for TCS GT2 class and possibly GT1 next season. Does anyone try this yet? Does carbon lower deck will fit with TRF version? like new Front One-Way, SSG decks, new front stablizer and so on.
Thanks,
J.
I have one comin this week from Rainbowten. This issue has been discuss between my friends and although the facts are not in yet we feel the layout might have a difference because of the new aluminum suspension mounts.
but as soon as I have the kit I'll check if it is possible and will be happy to post it here.
#1312
Tech Rookie
Hi Barry
Cheers for reply, the only literature in the MSC bag is the usual small paper "ticket" saying don't run slowly for too long, watch the resistor gets hot etc, it is the universal instruction set, not relative to any car. I think it was dropped in along with the motor because on the box it says, "Requires 540 motor and ESC" but TA-04's in the UK alreday have the MSC so I imagine there are more detailed fitting instructions relative to this chassis - this car was from Hong Kong. You don't have the TA-04 MSC slip of paper you could scan and send me do you !
Cheers
Cheers for reply, the only literature in the MSC bag is the usual small paper "ticket" saying don't run slowly for too long, watch the resistor gets hot etc, it is the universal instruction set, not relative to any car. I think it was dropped in along with the motor because on the box it says, "Requires 540 motor and ESC" but TA-04's in the UK alreday have the MSC so I imagine there are more detailed fitting instructions relative to this chassis - this car was from Hong Kong. You don't have the TA-04 MSC slip of paper you could scan and send me do you !
Cheers
#1313
Tech Adept
Izzyracer,
Thanks, Let me know how it goes.
Dan,
Yes I'll be there on Sunday.
See you then.
J.
Thanks, Let me know how it goes.
Dan,
Yes I'll be there on Sunday.
See you then.
J.
#1314
GP
I do not have a kit with the MSC so I can't help exept for this: # 7 and 13 on the U parts tray are for to servo mounting for the MSC.
I do not have a kit with the MSC so I can't help exept for this: # 7 and 13 on the U parts tray are for to servo mounting for the MSC.
#1315
Tech Rookie
Barry, thanks, that's a great help, I "think" I can see how it would fit now.... I just needed that little starter clue !
BRILLIANT !
Thanks a lot
BRILLIANT !
Thanks a lot
#1316
Bathtub vs. carbon lower deck.
Here in Europe we can not use 414 or TB evo series. Is their nobody using the bathtub in favor of the carbon deck with the TA04 in GT1 in the U.S.? Becouse in Europe many fast TA04 racer choose it in favor of the carbon deck.
Here in Europe we can not use 414 or TB evo series. Is their nobody using the bathtub in favor of the carbon deck with the TA04 in GT1 in the U.S.? Becouse in Europe many fast TA04 racer choose it in favor of the carbon deck.
#1317
Regional Moderator
I'm sure someone is using the tub chassis in GT1.
#1318
Tech Elite
iTrader: (27)
TA04-TRF
I want to share the TA04-TRF I got yesterday from Rainbowten. I will post update after I built it.
My initial impressions are.
da good:
Nice box, Nice option parts, New one-way, Worlds Edition Stabilizers, SSG graphite parts, Aluminum mounts, Aluminum center one nway
da bad: No Titanium Buckles, No Titanium Screw,
I wish they redisgned a new motor mount to allow more gear ratio changes like 414m2
I'll post more updates soon
My initial impressions are.
da good:
Nice box, Nice option parts, New one-way, Worlds Edition Stabilizers, SSG graphite parts, Aluminum mounts, Aluminum center one nway
da bad: No Titanium Buckles, No Titanium Screw,
I wish they redisgned a new motor mount to allow more gear ratio changes like 414m2
I'll post more updates soon
#1320
Tech Elite
iTrader: (3)
Re: TA04-TRF
Originally posted by izzyracer
I want to share the TA04-TRF...
I want to share the TA04-TRF...
I can't wait to see the actual car on Saturday... that is if you're actually building this beast...
Ian A.