Best and strongest cooling fan
#271
Tech Regular
I read a thread about some rule saying that one needs at least ten posts before it's possible to posts pics. Will troll around threads for now. Thanks
#274
Just updating the inquiries for our 8.4v fans
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
#275
Tech Elite
iTrader: (53)
Just updating the inquiries for our 8.4v fans
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
#276
Tech Adept
iTrader: (2)
Just updating the inquiries for our 8.4v fans
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
#278
Tech Initiate
iTrader: (3)
Guys, i used to run a heat sink with dual fans mounted directly on my motor. I couldn't keep the temps down In a six minute run, near 170F. The other day I received a R1 30mm 8.4 volt fan directly from R1wurks. Wow, does it move a lot of air compared to my old fans! Before installation I checked the current draw. I was surprised to find that my old fans and the new R1 each consume .25 amps when connected directly to the battery. I installed the R1 with 2 sided tape about 10mm behind my motor (17.5/serpent s411TE) and soldered the leads directly to the battery terminals at the speed control. Today I went to the track for practice, the temps never got above 145F! Great fan R1wurks!
#279
#281
R/C Tech Elite Member
iTrader: (28)
happy you guys liked the Geisha fans. you should try the Wild Turbo Fan now...
30mm-- http://shop.awesomatixusa.com/wild-t...motor-fan.html
40mm-- http://shop.awesomatixusa.com/wild-t...motor-fan.html
30mm-- http://shop.awesomatixusa.com/wild-t...motor-fan.html
40mm-- http://shop.awesomatixusa.com/wild-t...motor-fan.html
#282
Tech Regular
i use the wild turbo fan, 40mm, it pushes a serious amount of air
#283
I switched to the F5 fan from Superior Hobbies/Specialized RC and my motor temp immediately dropped 40* degrees.
Worth the investment.
Worth the investment.
#284
Just updating the inquiries for our 8.4v fans
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
Who distributes them in the UK?
Thanks
#285
Just updating the inquiries for our 8.4v fans
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V
R1 30mm 8.4V premium fan is now in stock
10 grams of thrust at 8.4V
now available thru our website
shipping out to hobby shops tomorrow
install options
-plug in with esc's that have servo type 8.4v terminal like the hobbywing V3
-Splice & solder directly to battery terminal
-plug in thru receiver at 6V