Originally Posted by LeadFoot
The Rayspeed has two modes. An equalizing mode and a conditioning mode.
The Equalizing mode discharges at 5A down to 0.9v
The Conditioning mode discharges at 1A down to 0.1v
There is NiMH and NiCD switch with a fixed 0.9v or 0.01v shutoff respectively on the battery type.
hi good review, just a few clarifications
(note i want to keep to 0.9v cut-off and no lower)
can you Equilise at 1A down to 0.9V ?
Cos equilizing at 5amp is a bit fast aint it, and wont really do a deep discharge to get them equal to a finer degree.