3300 getting really really hot on Turbo 35gfx
#16
I use a quasar pro. with a .05. I take a temp reading with my temp gun after the charge. if the temp is below 120f I imediately repeak to build up the heat where I want it. Between 130f and 140f. If it doesnt get hot enough or too hot I adjust on the next pack. I have had to go up as high as .07 indoors during the winter.
#17
Tech Elite
iTrader: (13)
I dont think you should run 2 peaks.... the GFX has a short peak lockout with every charge, if you repeak too soon after the first charge this lockout could be causing a overcharge condition and the high temps you reported. As I posted earlier I only peak once and I repeak only if the pack temp has dropped too low before my race. Also.... "yea what speedie said"
#18
Tech Apprentice
Thread Starter
I will give 1 peak a try.
#19
Tech Champion
iTrader: (4)
The Long Lock Out feature is user adjustable on or off. I leave it off all the time.
Take 2 packs. Cycle the first one with one peak and a discharge then cycle the 2nd with a repeak after 60 seconds. You will ALWAYS want to repeak after this test.
You will have more run time, more voltage and a lower IR with the repeak pack.
Take 2 packs. Cycle the first one with one peak and a discharge then cycle the 2nd with a repeak after 60 seconds. You will ALWAYS want to repeak after this test.
You will have more run time, more voltage and a lower IR with the repeak pack.
#20
Tech Champion
iTrader: (5)
Originally posted by AdrianM
The Long Lock Out feature is user adjustable on or off. I leave it off all the time.
Take 2 packs. Cycle the first one with one peak and a discharge then cycle the 2nd with a repeak after 60 seconds. You will ALWAYS want to repeak after this test.
You will have more run time, more voltage and a lower IR with the repeak pack.
The Long Lock Out feature is user adjustable on or off. I leave it off all the time.
Take 2 packs. Cycle the first one with one peak and a discharge then cycle the 2nd with a repeak after 60 seconds. You will ALWAYS want to repeak after this test.
You will have more run time, more voltage and a lower IR with the repeak pack.
Ray