3 racing new F1
#3286
so i'm getting to the end of the build of my FGX .. getting all electronics in now and to tell the truth, i have no idea where to put it all ...
here's a few attached pictures. i've been looking at how other FGX owners have crammed all the components under the hood but most chasis look heavily modified which i'm not up to doing just yet.
factory chasis set up. Yeah Racing 35A ESC w/ YR 10T motor, Bluebird lopro Hi-speed servo, Spektrum 2.4GHz receiver and 7.4V Lipo ...........
here's a few attached pictures. i've been looking at how other FGX owners have crammed all the components under the hood but most chasis look heavily modified which i'm not up to doing just yet.
factory chasis set up. Yeah Racing 35A ESC w/ YR 10T motor, Bluebird lopro Hi-speed servo, Spektrum 2.4GHz receiver and 7.4V Lipo ...........
1 The Tamiya connector is too large and inefficient, update this to a smaller Deans plug.
2 The speed control fan will not fit under the body. Remove it and shoe goo the fan behind the back of the motor on an angle.
3. The receiver can go on the right side of the chassis in the space behind the servo. you may need an extension from the speed control.
It took a couple of hours of just staring at the thing and moving wiring. SMH
Use either strapping tape or zip ties to manage your wiring. I tried spiraling but there is very limited room under the body.
Hope this helps
#3287
Tech Adept
iTrader: (5)
Three things:
1 The Tamiya connector is too large and inefficient, update this to a smaller Deans plug.
the dude that owns my local shop suggested the same thing, i am going to do it in a bit but need to get the soldering gear. in the mean time, i'll make due. it's my first car so still gettin all the tools i need.
2 The speed control fan will not fit under the body. Remove it and shoe goo the fan behind the back of the motor on an angle.
actually it fit under the body okay with a little jiggle room to spare.
3. The receiver can go on the right side of the chassis in the space behind the servo. you may need an extension from the speed control.
that was another suggestion too, it seems most stable standing on it's end. i will play around with it some more to see if there is a better option.
It took a couple of hours of just staring at the thing and moving wiring. SMH
Use either strapping tape or zip ties to manage your wiring. I tried spiraling but there is very limited room under the body.
Hope this helps
1 The Tamiya connector is too large and inefficient, update this to a smaller Deans plug.
the dude that owns my local shop suggested the same thing, i am going to do it in a bit but need to get the soldering gear. in the mean time, i'll make due. it's my first car so still gettin all the tools i need.
2 The speed control fan will not fit under the body. Remove it and shoe goo the fan behind the back of the motor on an angle.
actually it fit under the body okay with a little jiggle room to spare.
3. The receiver can go on the right side of the chassis in the space behind the servo. you may need an extension from the speed control.
that was another suggestion too, it seems most stable standing on it's end. i will play around with it some more to see if there is a better option.
It took a couple of hours of just staring at the thing and moving wiring. SMH
Use either strapping tape or zip ties to manage your wiring. I tried spiraling but there is very limited room under the body.
Hope this helps
#3291
#3292
Tech Elite
iTrader: (4)
More Exotek goodies
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
#3294
More Exotek goodies
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
#3295
Tech Master
More Exotek goodies
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
#3296
Tech Master
iTrader: (41)
Guys mine is still for sale, local track never opened this year and it needs to go. Exotek arms and chassis.
http://www.rctech.net/forum/r-c-item...gx-exotek.html
http://www.rctech.net/forum/r-c-item...gx-exotek.html
#3297
Tech Master
iTrader: (41)
Guys mine is still for sale, local track never opened this year and it needs to go. Exotek arms and chassis.
http://www.rctech.net/forum/r-c-item...gx-exotek.html
http://www.rctech.net/forum/r-c-item...gx-exotek.html
#3298
I'm sure everyone has already seen this, but I just noticed it was listed in the FGX parts section now.
Model No. FGX-332
Name Front Double Wishbone Suspension System For 3racing Sakura FGX
Status Coming Soon
Model No. FGX-332
Name Front Double Wishbone Suspension System For 3racing Sakura FGX
Status Coming Soon
#3299
Tech Champion
Cool! Can't wait till it comes out!
#3300
Tech Master
iTrader: (19)
More Exotek goodies
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
Just a question,i love the way the rear upper arms look on the FGX,just look scale and right i guess....the geometry isnt the best,but cant have it all...
Has anyone seen the carbon fibre upper arms on the Rabbit site on there chassis,are these available seperately,or not at all and just a custom one off?
Thanks...
http://www.speedtechrc.com/store/ebp...catmainid=1074