Victor Vector

iTrader: (9)

McKune chassis 4/10ths faster for me. Just with 3 hours testing.

Alright then........ what next..............Sweep tyres

Thanks Troy.

shano83

iTrader: (8)

Hey texas sorry to bug ya lol
Hey how do i adjust droop on the front end, ineed a little more but dont know how to go about it

Victor Vector

iTrader: (9)

Mostly, droop is contained in spring sag. These springs don't have much therefore droop doesn't apply. All the F1 springs are long enough to need preload and putting the e clips on should be a bit of a battle. You could put 1/12th scale springs on and fiddle with spacers and get droop that way. So far none up TZ way have found a need for front droop. The rear end is pretty sensitive to droop, keeping it equal is important and a number of 3-4mm above ride height is our bench mark.

Jacko

texastc

iTrader: (2)

Mine should be here in the morning.

as for sweep tires................ I dont know, do you?

A Ilievski

iTrader: (39)

Pictures?

MantisWorx

iTrader: (28)

My TQ run this afternoon!! car was pretty good i couldnt quite get the steering where i wanted it to as i got malayed in the first qual and broke my a arms, lower arms and two camber plates today (bad day)!! so i installed the metal camber plate but found i did not like the weight over the front axles , it felt better in the nose so the car was not as precise as i normally like. i also need a tire that is in between the med shimizu fronts and soft bridgstones. I did win the main but had to stop 4 times to fix the front wing that kept hitting one of the front tires!
http://www.youtube.com/user/Mantiswo.../0/Hg39zUraeeI

shoe

iTrader: (3)

Still looking for a motor that fits.Thanks

JManangan

I am running a spare murfdogg 21.5 that I had. All I did was sand down a small portion of the left rear corner of the top deck behind the post to get full range of motion.

MantisWorx

iTrader: (28)

A main yesterday!

I stopped at 1:20,1:35 and 2:31 and I think there was another one in there too, i had to straighten the front wing.
http://www.youtube.com/user/Mantiswo.../0/zyTKSg3KG24

RedBullRacing

iTrader: (5)

What readings are you all getting for your front camber settings ?

With the optional 1*plate and on setup wheels, i'm seeing 3.0-3.5* !

I'm contemplating an upgrade chassis kit, but i want to see what the IFS kit looks like first.

lightfoot

iTrader: (2)

Do you happen to be using the optional front wing stiffener thing ?
Friend of mine was using it and was running into the same problems your describing... as soon as he removed that thing , no more problems...

MantisWorx

iTrader: (28)

I actually made my own! if you dont have it the wing bounces and scrapes everywhere, maybe i need to come up with another braces that doesnt use the two center screws to hold down. Its a valid point for sure!

lightfoot

iTrader: (2)

Well, I'm running a RedBull body and figured the flexi wing was part of the realistic package

Troy Mckune

iTrader: (51)

The FIA is currently investigating your wing.

liljohn1064

iTrader: (17)

Thunder Power Z3-R.