Team Losi JRXS
Hi
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Originally Posted by Evicerator
Hehe!
The only reason I'm CBin' is cuz I wasn't there to watch/race/help!
The only reason I'm CBin' is cuz I wasn't there to watch/race/help!
I figured you would of just drove there like the ROAR Nats??? I was waiting for you to show up.
The Evicerator
I was gonna install a hydrofoil on my Escape but I am a little short on funds because my roomate still hasn't paid up!
Otherwise I would have been there to throw down in the 2nd to last qualifier just like Nats!
Otherwise I would have been there to throw down in the 2nd to last qualifier just like Nats!
Originally Posted by TheCoolCanFanMan
Hi
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Tech Elite
iTrader: (66)
Just put some pics of my stuff for sale in the buy/sell section, here is the link, and a taste. http://www.rctech.net/forum/showthread.php?t=120586
Tech Master
iTrader: (8)
Josh Numan Setup
I have been setting up my car to match the Josh Numan setup. I have a question about the front suspension setup. I have set the front roll center to high and I have added two shims under the pivot blocks (front and rear). In his setup he mentioned that he was using the BK blocks, as I am using the updated arms. My question is when I install my shocks and set the ride height and droop, my preload collars are all the way to the top of the shock, and the car bottoms at the same time the shocks do. Is that supposed to be that way? Did I install too many shims under the pivot blocks (he stated 2 .050" shims...I used 2 shims that were included with shim/block set)? I have shortened the shock length as far as possible also... I haven't driven the car yet, and it’s not a problem yet, but this seemed different from other cars I've setup. Thanks!
Tech Master
iTrader: (15)
Originally Posted by PitNamedGordie
I have been setting up my car to match the Josh Numan setup. I have a question about the front suspension setup. I have set the front roll center to high and I have added two shims under the pivot blocks (front and rear). In his setup he mentioned that he was using the BK blocks, as I am using the updated arms. My question is when I install my shocks and set the ride height and droop, my preload collars are all the way to the top of the shock, and the car bottoms at the same time the shocks do. Is that supposed to be that way? Did I install too many shims under the pivot blocks (he stated 2 .050" shims...I used 2 shims that were included with shim/block set)? I have shortened the shock length as far as possible also... I haven't driven the car yet, and it’s not a problem yet, but this seemed different from other cars I've setup. Thanks!
youll have to shave the shock bottom, where the spring retainer sits. I think .060" should be plenty...
Originally Posted by TheCoolCanFanMan
Hi
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
am i invisible
Tech Addict
So Todd was this Matt's last race, or will he make it to Vegas??
Originally Posted by T. Hodge
_Final B Cat. ISTC 1/10 -- 2^ Run Results
Pos. Driver Best Lap
1 1 Atsushi Hara 18.805
2 3 Hayato Matsuzaki 19.106
3 8 Graversen Steen 19.197
4 2 Pumpler Thomas 19.059 16
5 4 Ahoniemi Simo 18.968
6 5 Pavidis Mark 19.271 8
7 10 Francis Matt 18.564
8 7 Cyrul Josh 23.640 2
9 9 Kaerup Jonas -
10 6 Tosolini Chris 19.094 0
Notice MF's fastest lap in the B-Main. He backed this up with a 18.7.
Pos. Driver Best Lap
1 1 Atsushi Hara 18.805
2 3 Hayato Matsuzaki 19.106
3 8 Graversen Steen 19.197
4 2 Pumpler Thomas 19.059 16
5 4 Ahoniemi Simo 18.968
6 5 Pavidis Mark 19.271 8
7 10 Francis Matt 18.564
8 7 Cyrul Josh 23.640 2
9 9 Kaerup Jonas -
10 6 Tosolini Chris 19.094 0
Notice MF's fastest lap in the B-Main. He backed this up with a 18.7.
Nope, no Matt for vegas
Originally Posted by TheCoolCanFanMan
Hi
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
am i invisible
Is there any video footage of the touring car worlds like the 1/12 ?
Malc TCCFM
am i invisible
Yo!!!!!!! Anybody seen or heard from Malc in a while?????? I can't believe he just dissappeared like that!! LMAO
I think I read a post where the video of the TC stuff was being edited and was to be sold by Ray Wood and some others. They may have had some lock on the coverage. Thats all I know buddy.
Brant
Originally Posted by PitNamedGordie
I have been setting up my car to match the Josh Numan setup. I have a question about the front suspension setup. I have set the front roll center to high and I have added two shims under the pivot blocks (front and rear). In his setup he mentioned that he was using the BK blocks, as I am using the updated arms. My question is when I install my shocks and set the ride height and droop, my preload collars are all the way to the top of the shock, and the car bottoms at the same time the shocks do. Is that supposed to be that way? Did I install too many shims under the pivot blocks (he stated 2 .050" shims...I used 2 shims that were included with shim/block set)? I have shortened the shock length as far as possible also... I haven't driven the car yet, and it’s not a problem yet, but this seemed different from other cars I've setup. Thanks!
You can either cut the shock bottom as Billanti had mentioned or you can run the high tower position. If you do run the high tower position you will have to move the camber link location down one hole.
I just joined the JRXS movement. I sold me T2 and always wanted to try a losi for indoor carpet season. What is the most used setup sheet for stock? What mods should be done to better the car?
Its a med-hi bit track.
Its a med-hi bit track.
Originally Posted by POOKYT
Yo!!!!!!! Anybody seen or heard from Malc in a while?????? I can't believe he just dissappeared like that!! LMAO
I think I read a post where the video of the TC stuff was being edited and was to be sold by Ray Wood and some others. They may have had some lock on the coverage. Thats all I know buddy.
Brant
I think I read a post where the video of the TC stuff was being edited and was to be sold by Ray Wood and some others. They may have had some lock on the coverage. Thats all I know buddy.
Brant
Its just that the 1/12 was on the orion site but the 1/10 touring car wasn't
Cheers Malc THE CAN MAN...........HERE AGAIN IN THE FLESH SO TO SPEAK
Originally Posted by crazycraig
I just joined the JRXS movement. I sold me T2 and always wanted to try a losi for indoor carpet season. What is the most used setup sheet for stock? What mods should be done to better the car?
Its a med-hi bit track.
Its a med-hi bit track.
Are you racing on foam tire or rubber tire?