Team Losi JRXS
#8492
Shocks?
Originally Posted by geeunit1014
The jrxs shocks are too small to fit onthe xxxs
not sure about the knuckles or if losi is making lcd's for the xxxs
not sure about the knuckles or if losi is making lcd's for the xxxs
Have you tried them in the XXX-S. Are the stock springs too shock or can you get away with it by using AE springs?
#8494
Originally Posted by Dasupacat1
I don't have bk brackets. where can I get them?
He had them on his 19T and mod cars that ran both rubber AND foam tires for this weekend's Region 12 Carpet Championships at Gilroy...And he won both classes. The arms looked great and will make the BK/PK brackets passe.
His front upper camber links were also fabricated fairly nicely.
#8495
Originally Posted by JRX-S Bill
Yesterday, Todd Hodge said they were packaging up the new arms and would be sending them out soon.
He had them on his 19T and mod cars that ran both rubber AND foam tires for this weekend's Region 12 Carpet Championships at Gilroy...And he won both classes. The arms looked great and will make the BK/PK brackets passe.
His front upper camber links were also fabricated fairly nicely.
He had them on his 19T and mod cars that ran both rubber AND foam tires for this weekend's Region 12 Carpet Championships at Gilroy...And he won both classes. The arms looked great and will make the BK/PK brackets passe.
His front upper camber links were also fabricated fairly nicely.
#8496
Originally Posted by JRX-S Bill
His front upper camber links were also fabricated fairly nicely.
#8497
Originally Posted by weliin
What is the fabricated upper links? Longer front links perhaps?
#8498
Originally Posted by Fatboy Joe
Hi, was he using the rear motor chassis too? Thanks
But, I still hold some hope for the current design with the new arms and the new front links.
PookyT...Get your Dremel ready...
Bill
#8499
Originally Posted by JRX-S Bill
Absolutely!
But, I still hold some hope for the current design with the new arms and the new front links.
PookyT...Get your Dremel ready...
Bill
But, I still hold some hope for the current design with the new arms and the new front links.
PookyT...Get your Dremel ready...
Bill
Sonny
#8500
Ready and Will'n !!!!!!!!!!!
I have one side of the camber mod done so far. I will have both side done for next weekends race.
2 races ago I tried the 6 deg. front hubs and love them. Last race I put in the 8 deg. after the first heat and ran them the rest of the day. To me the 8 deg. hubs didn't add or take away any steering but smoothed out the steering over all. I hope this helps guys. Personally on the asphalt I like the 6deg. the most because it gave me a little bit more of the aggressive feel I prefer. Try them both as I like the 6's and 8's better than the stock 4's.
Brant
I have one side of the camber mod done so far. I will have both side done for next weekends race.
2 races ago I tried the 6 deg. front hubs and love them. Last race I put in the 8 deg. after the first heat and ran them the rest of the day. To me the 8 deg. hubs didn't add or take away any steering but smoothed out the steering over all. I hope this helps guys. Personally on the asphalt I like the 6deg. the most because it gave me a little bit more of the aggressive feel I prefer. Try them both as I like the 6's and 8's better than the stock 4's.
Brant
#8501
Originally Posted by Fatboy Joe
Thanks Bill. were u able to gets pics of the new front links? I hope POOKYT can make one for us. Thanks
Sonny
Sonny
Brant
#8502
Originally Posted by POOKYT
You will be surprised that you only need 1 extra set of front arms and 0 deg. front castor blocks to make these. You will need to get 2 more front outer hinge pins. I'll try to post pics this week when I get mine finished.
Brant
Brant
Cool! Thanks!
#8503
Anyone want to trade there JRXS for a 415??? Just looking
#8505
No its the "old" one with no ms or msx stuff all stock. The car has been run twice at the track. The only thing you would need to be competitive would be a good driver lol and maybe the LW arms and towers other then that I don't think the new stuff would be night and day diffrence.