Team Losi JRXS
04-27-2005, 01:47 PM
#4516
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally posted by Andy C
This sucks I just buy the jrxs and a week later my local track closes.
This sucks I just buy the jrxs and a week later my local track closes.
04-27-2005, 02:02 PM
#4517
Re: Todd, RBLove, Ray or Anyone
Originally posted by CRASH
How far out do you have to space the front shocks top and bottom to run the number 1 hole inside on the tower? So that it does not rub.
Thanks,
How far out do you have to space the front shocks top and bottom to run the number 1 hole inside on the tower? So that it does not rub.
Thanks,
04-27-2005, 03:09 PM
#4518
Hey guys,
Can somebody post a pic of the diff clearance slots in the lower deck showing how much material you need to remove and where? I noticed several people said this was necessary to run the diffs in the low position. I'm sanding that part now so I want to get it done before I start assembly. Thanks!
Can somebody post a pic of the diff clearance slots in the lower deck showing how much material you need to remove and where? I noticed several people said this was necessary to run the diffs in the low position. I'm sanding that part now so I want to get it done before I start assembly. Thanks!
04-27-2005, 03:12 PM
#4519
Re: Todd, RBLove, Ray or Anyone
Originally posted by CRASH
How far out do you have to space the front shocks top and bottom to run the number 1 hole inside on the tower? So that it does not rub.
Thanks,
How far out do you have to space the front shocks top and bottom to run the number 1 hole inside on the tower? So that it does not rub.
Thanks,
04-27-2005, 04:39 PM
#4520
Man, don't you just hate when you miss your deliverys.
Horizon did a great job of getting the steering arms out to me quickly, then I go and miss the mail person....
Atleast I'll be rolling again by tomorrow. Too bad their predicting it'll be raining cats and dogs here!
When it does clear up, I'm planning on taking my car out for some setup running on a local tennis court. The tennis courts (even when dusty) seem to perfectly recreat the traction on an average asphalt parking lot.
So hopefully with the new steering arm and the proper servo horn, I'll be able to run my car more than once.<fingers crossed>
Horizon did a great job of getting the steering arms out to me quickly, then I go and miss the mail person....
Atleast I'll be rolling again by tomorrow. Too bad their predicting it'll be raining cats and dogs here!
When it does clear up, I'm planning on taking my car out for some setup running on a local tennis court. The tennis courts (even when dusty) seem to perfectly recreat the traction on an average asphalt parking lot.
So hopefully with the new steering arm and the proper servo horn, I'll be able to run my car more than once.<fingers crossed>
04-27-2005, 05:30 PM
#4524
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally posted by NVisible
Is the topdeck not countersunk?
Is the topdeck not countersunk?
No its not....many places on the top deck you can not counter sink b/c of the locating pins. Also most people have found that counter sinking the top deck will lead to tweak issues.....go ask the PRO-4 users.....been there done that.
04-27-2005, 05:54 PM
#4525
Originally posted by Juan Valdez
Hey guys,
Can somebody post a pic of the diff clearance slots in the lower deck showing how much material you need to remove and where? I noticed several people said this was necessary to run the diffs in the low position. I'm sanding that part now so I want to get it done before I start assembly. Thanks!
Hey guys,
Can somebody post a pic of the diff clearance slots in the lower deck showing how much material you need to remove and where? I noticed several people said this was necessary to run the diffs in the low position. I'm sanding that part now so I want to get it done before I start assembly. Thanks!
I took my car apart for you. Remember that when I want naked pictures of your sister. Ok?
04-27-2005, 06:00 PM
#4526
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally posted by Greg Sharpe
I took my car apart for you. Remember that when I want naked pictures of your sister. Ok?
I took my car apart for you. Remember that when I want naked pictures of your sister. Ok?
Just kidding Chuck.....couldnt help myself
04-27-2005, 06:02 PM
#4527
Originally posted by Kevin K
No its not....many places on the top deck you can not counter sink b/c of the locating pins. Also most people have found that counter sinking the top deck will lead to tweak issues.....go ask the PRO-4 users.....been there done that.
No its not....many places on the top deck you can not counter sink b/c of the locating pins. Also most people have found that counter sinking the top deck will lead to tweak issues.....go ask the PRO-4 users.....been there done that.
interesting!
Have spare parts been distributed to the LHS' yet?
04-27-2005, 06:37 PM
#4529
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally posted by NVisible
Ahh. Ive read the opposite about the 415.
interesting!
Have spare parts been distributed to the LHS' yet?
Ahh. Ive read the opposite about the 415.
interesting!
Have spare parts been distributed to the LHS' yet?
http://www.horizonhobby.com/Shop/ByC...g&SubCategory=
Normal spares
http://www.horizonhobby.com/Shop/ByC...s&SubCategory=
Option parts
04-27-2005, 06:41 PM
#4530
Tech Regular
When will all of the option parts be out?