3 cell Drag racing thread
Anyone?
|
4 Attachment(s)
there seems to be no drag racing section for rctech ???
not sure if this counts but i am making my own drag car from old 1/12 scale parts. running a 9t (4000kv) motor on 3s here is a couple pics (off phone :mad:) i have done a bit more,but really need some proper hubs so there is no diff and some soft drag tyres |
Originally Posted by ozzy-crawl
(Post 9034925)
there seems to be no drag racing section for rctech ???
not sure if this counts but i am making my own drag car from old 1/12 scale parts. running a 9t (4000kv) motor on 3s here is a couple pics (off phone :mad:) i have done a bit more,but really need some proper hubs so there is no diff and some soft drag tyres Sweet I would like to see some time slips,LiPo's fly!!! |
I am going a DRC chassic sporting a 13 mm sintered tuning rotor
inside Novak's BALLISTIC 3.5T/10500KV Traction control via Spectrum's DX3R & Mamba Max Pro Speed Control Needless to say I am like a kid at Christmas waiting for delivery Going to do a funny car next http://i943.photobucket.com/albums/a...arts200054.jpg http://i943.photobucket.com/albums/a...arts200064.jpg This is the all new body that will go on it http://i943.photobucket.com/albums/a...ro20120Pic.jpg http://i943.photobucket.com/albums/a...adeer/Aero.jpg |
New FC body ava late May
http://i943.photobucket.com/albums/a...r/2009mold.jpg Based off the stang,plenty of room for 2" tires up front http://i943.photobucket.com/albums/a...John_Force.jpg |
Where would you get one those chassis from, the rail looks amazing have been Googling but with no success
|
Originally Posted by bigted
(Post 9036087)
Where would you get one those chassis from, the rail looks amazing have been Googling but with no success
|
Just ordered this direct drive funny car
includes a wheelie bar Notice there is no gear on just one side near the tire like some chassis this eliminates one tire pulling harder than another plenty of room up front for a 3 cell lipo in order to launch harder http://i943.photobucket.com/albums/a...20CAR20003.jpg http://i943.photobucket.com/albums/a...20CAR20001.jpg http://i943.photobucket.com/albums/a...20CAR20005.jpg |
Loving the look of these cars , any video's of them in action ?
|
So where can these be ordered? I'm really loving the work and detail of your car.
|
Originally Posted by Missle
(Post 9037013)
So where can these be ordered? I'm really loving the work and detail of your car.
|
1.178 seconds in 132'
http://www.youtube.com/watch?v=fY15NyDG3Jg Just to let ya know LiPo electric is faster than Nitro :sneaky: |
who makes the funny car chassis that thing looks sweet???
also if that is the mold for the Funny car body it looks nice can't wait to see a clear version of it |
Originally Posted by dodgeboy
(Post 9039322)
who makes the funny car chassis that thing looks sweet???
also if that is the mold for the Funny car body it looks nice can't wait to see a clear version of it |
I have been 3 cell drag racing for as long as they have had 3 cells.
My best runs have been 1.28 @ 102 mph in 3 cell rail (dragster) and 1.36 seconds @ 97 mph in a 3 cell funny car You can check out my cars at www.TimSmithRacing.com Both car running Novak motor, Novak Kinetic esc, MaxAmps 4200 mah cells If your looking for drag chassis most of the record holding cars are built by Grand Motorsports (GrandMotorsports.com) or JC Dragworks unfortunately gear box style cars like pictured above look awesome but are not as fast as normal style (sidewinder) cars and don't work any better because of their design. That style car came out a couple of years ago but was never as fast as existing cars. What is the fastest you have run so far with your cars? |
All times are GMT -7. It is currently 06:01 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.