What's new @ Speed Tech R/C
#1682
Hi Steve,
how long until you have Cuda bevel input gears back in stock? and the delrin diff halfs.
how long until you have Cuda bevel input gears back in stock? and the delrin diff halfs.
#1683
Originally posted by nnick
Hello,
I see that the Keyence Rapida Pro ESC (preferably blue case ) is out of stock!
When do you have it back in stock?
Nick
Hello,
I see that the Keyence Rapida Pro ESC (preferably blue case ) is out of stock!
When do you have it back in stock?
Nick
The website was updated last night, it shows in stock now.
Steve Wang
#1684
Originally posted by Herminator
Hi Steve,
how long until you have Cuda bevel input gears back in stock? and the delrin diff halfs.
Hi Steve,
how long until you have Cuda bevel input gears back in stock? and the delrin diff halfs.
I'm sorry, they were available up until yesterday (had a few guys ordering cuda parts and they bought them all) we might not see anything from Alex Racing towards the end of the month now (I just received an email a couple days ago that our shipment is delayed...I think there is a big race going on in Japan at the moment or soon )
Steve Wang
#1685
Originally posted by SpeedTech
Herminator,
I'm sorry, they were available up until yesterday (had a few guys ordering cuda parts and they bought them all) we might not see anything from Alex Racing towards the end of the month now (I just received an email a couple days ago that our shipment is delayed...I think there is a big race going on in Japan at the moment or soon )
Steve Wang
Herminator,
I'm sorry, they were available up until yesterday (had a few guys ordering cuda parts and they bought them all) we might not see anything from Alex Racing towards the end of the month now (I just received an email a couple days ago that our shipment is delayed...I think there is a big race going on in Japan at the moment or soon )
Steve Wang
I need diff halfs to get going indoor on carpet don't want the expense of complete diffs when I have two lots of internals sitting doing nothing.
Looks like I'll have to keep a careful eye out to see when you get new bits in, hoping to have them here by the 3rd of Oct....
#1686
Originally posted by Herminator
I need diff halfs to get going indoor on carpet don't want the expense of complete diffs when I have two lots of internals sitting doing nothing.
Looks like I'll have to keep a careful eye out to see when you get new bits in, hoping to have them here by the 3rd of Oct....
I need diff halfs to get going indoor on carpet don't want the expense of complete diffs when I have two lots of internals sitting doing nothing.
Looks like I'll have to keep a careful eye out to see when you get new bits in, hoping to have them here by the 3rd of Oct....
Steve Wang
#1687
Steve,
Do you plan to get the next Losi TC?
I'm asking this because you don't carry the XXX-S kit and you make parts for it.
Thanks.
Gilles
Do you plan to get the next Losi TC?
I'm asking this because you don't carry the XXX-S kit and you make parts for it.
Thanks.
Gilles
#1688
Tech Adept
Steve
Is that going to be a shipment of a number of different Alex parts??
Would there be any A6510 6.8mm uncentered ball studs in the order??
Jim Crider
Is that going to be a shipment of a number of different Alex parts??
Would there be any A6510 6.8mm uncentered ball studs in the order??
Jim Crider
#1690
Originally posted by utieh
Steve,
Do you plan to get the next Losi TC?
I'm asking this because you don't carry the XXX-S kit and you make parts for it.
Thanks.
Gilles
Steve,
Do you plan to get the next Losi TC?
I'm asking this because you don't carry the XXX-S kit and you make parts for it.
Thanks.
Gilles
As much as we like to, the exclusive distributor for Losi (Horizon Hobbies) refuses on 3 occasion to allow us to carry Losi products...we have no idea why
Steve Wang
#1691
Originally posted by JIMC
Steve
Is that going to be a shipment of a number of different Alex parts??
Would there be any A6510 6.8mm uncentered ball studs in the order??
Jim Crider
Steve
Is that going to be a shipment of a number of different Alex parts??
Would there be any A6510 6.8mm uncentered ball studs in the order??
Jim Crider
Nice to see you back on the messageboard Yes, the A6510 should be on the shipment.
Steve Wang
#1692
Originally posted by kevinm
Steve, will you be carrying the new Hudy all in one ultimate setup system?
Steve, will you be carrying the new Hudy all in one ultimate setup system?
Yes, we will
Steve Wang
#1693
Tech Adept
Nice to talk to you again Steve!
Outdoor season at the local track will be wrapping up on the 25th of Sept. and hopefully indoor carpet season will start up the second or third week of Oct..
On the A6510's, do I replace all four of the rear balls or just the front two or rear two of the rear arm balls and do I install with the offset towards the inside or the outside of the chassis.
The A6510's will help me to reduce the rear toe correct???
I'd like to free up the back end of the car a bit/
Also, do you have the Amb personal's ???
Thanks
Jim Crider
Outdoor season at the local track will be wrapping up on the 25th of Sept. and hopefully indoor carpet season will start up the second or third week of Oct..
On the A6510's, do I replace all four of the rear balls or just the front two or rear two of the rear arm balls and do I install with the offset towards the inside or the outside of the chassis.
The A6510's will help me to reduce the rear toe correct???
I'd like to free up the back end of the car a bit/
Also, do you have the Amb personal's ???
Thanks
Jim Crider
#1694
Originally posted by JIMC
Nice to talk to you again Steve!
Outdoor season at the local track will be wrapping up on the 25th of Sept. and hopefully indoor carpet season will start up the second or third week of Oct..
On the A6510's, do I replace all four of the rear balls or just the front two or rear two of the rear arm balls and do I install with the offset towards the inside or the outside of the chassis.
The A6510's will help me to reduce the rear toe correct???
I'd like to free up the back end of the car a bit/
Also, do you have the Amb personal's ???
Thanks
Jim Crider
Nice to talk to you again Steve!
Outdoor season at the local track will be wrapping up on the 25th of Sept. and hopefully indoor carpet season will start up the second or third week of Oct..
On the A6510's, do I replace all four of the rear balls or just the front two or rear two of the rear arm balls and do I install with the offset towards the inside or the outside of the chassis.
The A6510's will help me to reduce the rear toe correct???
I'd like to free up the back end of the car a bit/
Also, do you have the Amb personal's ???
Thanks
Jim Crider
You can replace all four of the rear ball, or just the rear two or the front two. Using two will not reduce as much toe as using 4.
I'll see if we have any supplier that can supply us AMB personals.
Steve Wang