Reflex Suspension Dynamics (RSD) TC6 Upgrades (vertical ball studs, pistons,etc)
#1291
Below is a good starting set-up for the 6/6.1
Front:
-1,1,1.5 Piston 550cst oil
-15.5lb spring
-Outside link on tower caps (shorter) 3mm underneath the inside link, 2mm outside (position 3 on turnbuckle will substitute)
-3A Roll center blocks
-4 Deg Caster
-Shocks 3rd hole from the inside on shock tower
-6 on droop
-5mm ride height
-Slipper Spool/ spool tight
-Black sway bar
Rear
-1,1,1.5 Piston 450cst oil
-13.5lb spring
-Outside link on tower caps 2mm underneath inside, 3mm outside (position 3 on tower will substitute).
-3A Roll center blocks
-shocks 2 holes out on shock tower
-5 on droop
-5.5 mm ride height
-Gear diff 700cst oil
-2.5 inboard toe 1 deg toe hub (if you are not running toe in hubs, 3 degs inboard is enough toe)
-Black sway bar
-5.5mm ride height
Front:
-1,1,1.5 Piston 550cst oil
-15.5lb spring
-Outside link on tower caps (shorter) 3mm underneath the inside link, 2mm outside (position 3 on turnbuckle will substitute)
-3A Roll center blocks
-4 Deg Caster
-Shocks 3rd hole from the inside on shock tower
-6 on droop
-5mm ride height
-Slipper Spool/ spool tight
-Black sway bar
Rear
-1,1,1.5 Piston 450cst oil
-13.5lb spring
-Outside link on tower caps 2mm underneath inside, 3mm outside (position 3 on tower will substitute).
-3A Roll center blocks
-shocks 2 holes out on shock tower
-5 on droop
-5.5 mm ride height
-Gear diff 700cst oil
-2.5 inboard toe 1 deg toe hub (if you are not running toe in hubs, 3 degs inboard is enough toe)
-Black sway bar
-5.5mm ride height
#1292
Any idea when the rsd6 kit and rear bumper will be back in stock?
#1295
Any chance of opening up a preorder?
#1297
#1298
#1300
Thanks for the setup.
#1303
Tech Elite
iTrader: (49)
You're the man CT. Thanks for showing me the ropes. I am really impressed with your car. I learned a lot. Maybe next time I will remember not to pack the rain. I'm rebuilding my shocks tonight and I'll let you know how the o-rings work out. The hex shims are awesome by the way. Can't wait to see what you have coming down the pipe. I'll get some more concrete ideas together for the bumpers and if you want I can send you the motor mount from my VTA. Take care bro. I owe you!
AWD
AWD