shoe

iTrader: (3)

Thanks. Should the short links be parallel to the arms at rest.

CristianTabush

iTrader: (13)

Not quite. Use the shimming indicated on the set-up from the Fall Classic as a starting point and adjust for feel on the track. Different layouts require slightly different shimming.

Geberit

Now when the new TC6.1 comes with new 5x10 bearisgs what's going to happen with the DCJs project?

Jeff Cuffs

iTrader: (2)

Received the fan mounts and sway bar collars. Top notch once again Christian. Thanks again

cwoods34

iTrader: (10)

An XRAY driver at our track was so impressed with it he bought one and put it on his T3! If I remember right he only had to drill 1 hole since there was already one backside of the motor.

CristianTabush

iTrader: (13)

Not sure about it yet. The project is moving slower than expected, so we are still in time to change them over.

CristianTabush

iTrader: (13)

Also, arriving Friday/ Monday, along with the rear bumpers is the fan mount accessories, of which are 2.

1.25mm Fan Adaptor: A simple CF piece that will bolt on to the 30mm fan holes and "reduce" the hole distance. It looks trick and allows for 25mm fans to be secured with 2 screws!

2.A Fan Mount Base: This is a roughly 1"x1" CF piece that will allow you to mount your Fan mount to it and then servo tape the Fan Mount Bracket to any Chassis. It also Works great for modified racing to cool off your speedo. This Base allows you to use our Fan Mount with any TC Chassis out there!

These will be available separately, as well as bundled with the fan mounts.

Lastly, next week our all new 7075 T6 hard anodized aluminum ball ends will arrive. These are available in std 8mm length and extra low profile (-1mm) 3mm threads.

CristianTabush

iTrader: (13)

Just received news that our latest prototype DCJ's will be here hopefully within a week. Once we test them, we will start working on manufacturing, although that due to the Lunar New Year Holiday they will not be ready until around April

CristianTabush

iTrader: (13)

RSD015 RSD 4.3mm 7075 T6 Hard Anodized Aluminum Ball Ends - 4 pcs. (3mm thread -1mm height)



RSD014 RSD 4.3mm 7075 T6 Hard Anodized Aluminum Ball Ends - 4 pcs. (8mm thread)

EAMotorsports

iTrader: (79)

Any word on more of those bullet connectors or when you will be getting some?

Thanks
EA

CristianTabush

iTrader: (13)

Sorry, soon. We had been waiting for our new pricing since we just became the official USA distributor for QTEQ products. We are accepting dealer inquiries for QTEQ items too. We are just working on all the details and promotional materials.

briankstan

iTrader: (8)

Placed an order for some Reflex goodies, I'll be looking forward to getting them on my TC6. Reflex always produces quality functional products. Although I'm new to the TC6, I knew I couldn't go wrong by going with Reflex products

slow42

Will you get the "diff-ring polishing tool" from QTEQ too?

CristianTabush

iTrader: (13)

Yes, we sure will. I am working on placing the order over the weekend, so all items should be back in stock within 10 days or so...

Rob B99

iTrader: (15)

Any word when the rear bumpers will be shipping out ??????