Gearing input needed, 13.5 and 10.5 non-timing TC
03-28-2011, 11:51 AM
#1
Gearing input needed, 13.5 and 10.5 non-timing TC
A little something I want to try before the indoor season is over, purely out of curiosity.
So if anyone out there runs or has run 10.5 or 13.5 non-timing Touring cars, post your Final Drive Ratios along with the track size here.
Thanks.
So if anyone out there runs or has run 10.5 or 13.5 non-timing Touring cars, post your Final Drive Ratios along with the track size here.
Thanks.
03-28-2011, 12:16 PM
#2
ou doors we run between 4.5 and 3.5 depending on rack size MACH Heemstede last year we used 3.5(70 or 80m straight with a fast run onto it)
we run at our local tracks 4.0 (65 or 70m straight)
indoors i would try 4.5 and see from there
we run at our local tracks 4.0 (65 or 70m straight)
indoors i would try 4.5 and see from there
03-28-2011, 12:36 PM
#4
mainly 13.5 but some 10.5 too
These videos are from the A main at ETS mach last year we were running 3.5 gearing and 13.5 Speed passion motors and the Citrix 0 timing speedos
These videos are from the A main at ETS mach last year we were running 3.5 gearing and 13.5 Speed passion motors and the Citrix 0 timing speedos
| + YouTube Video | |
| + YouTube Video | |
| + YouTube Video | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
