300LikesTeam Associated TC4
09-17-2005, 08:13 AM
#6286
WAZZZ UP
Originally Posted by dodgeguy
Does AE make a battery brace for the Factory Team kit? Or any other manufacture?
Also does any one know of links to a set up for the FT? AE's website is a little out dated in regards to set up info.
Also does any one know of links to a set up for the FT? AE's website is a little out dated in regards to set up info.
Dodgeguy
1. Yes AE makes a battery brace and so does 3racing @ ( http://www.3racing.com.hk/ )
2. Use the set up that comes with the kit in the manual. I was a witness last night @ or track and saw a brand new FT TC4 that was built on race day run with some of the best drivers in the state of Florida in 19 turn and they were running Corally or FK05's. My jaw was on the floor. The drive that was driving the FT was using a box stock diff set up that comes with the kit.
Check this site out it has a couple of set ups http://home.sc.rr.com/mlufaso/rc/FTTC4/index.html
THE FACTORY DRIVERS SHOULD BE POSTING SOME SET UPS ON R\C TECH SOON!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Regards,
E
Last edited by RED-LINE M03; 09-17-2005 at 09:05 AM. Reason: @%%$^
09-17-2005, 08:32 AM
#6287
Originally Posted by RED-LINE M03
Dodgeguy
1. Yes AE makes a battery brace and so does 3racing @ ( http://www.3racing.com.hk/ )
2. . . . . . . .
Check this site out it has a couple of set ups http://home.sc.rr.com/mlufaso/rc/FTTC4/index.html
THE FACTORY DRIVERS SHOULD BE POSTING SOME SET UPS ON R\C TECH SOON!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Regards,
E
1. Yes AE makes a battery brace and so does 3racing @ ( http://www.3racing.com.hk/ )
2. . . . . . . .
Check this site out it has a couple of set ups http://home.sc.rr.com/mlufaso/rc/FTTC4/index.html
THE FACTORY DRIVERS SHOULD BE POSTING SOME SET UPS ON R\C TECH SOON!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Regards,
E
What I would give for my 3Racing wish list.....
http://www.rctech.net/forum/showthre...65#post1820165
3Racing makes really cool stuff for the TC4!!!
09-17-2005, 11:01 AM
#6288
I just bought the new FT TC4 so I don't have use for my spare.
Anyone interested in a never raced TC4 with a 3Racing SSG chassis conversion? The car come with many things. SSG chassis, Aluminum servo mounts, aluminum steering rack, Assoc-graphite suspension, front and rear sway bars, all Team aluminum suspension blocks, rear 3Racing aluminum rear hubs, many new extra 48 pitch spurs and pinions(still in it's packages), Team blue motor heat sink, spare arms(front and rear), rear hubs, front steering blocks, front hub carriers, aluminum shock mount holders, polished suspension pins, Team blue titanium turnbuckles, stock chassis, dual fan set-up, original TC4 box, and instructions plus two new TC4 sticker sheets. Most of this is not pictured. The chassis come with the same SSG battery holder. I just like to use tape.
Email me if you want to see more at [email protected]. Does not come with electronics. I will sell it for $350 shipped out from Bangkok, Thailand to anywhere in the world. payment will be paypal only.
Anyone interested in a never raced TC4 with a 3Racing SSG chassis conversion? The car come with many things. SSG chassis, Aluminum servo mounts, aluminum steering rack, Assoc-graphite suspension, front and rear sway bars, all Team aluminum suspension blocks, rear 3Racing aluminum rear hubs, many new extra 48 pitch spurs and pinions(still in it's packages), Team blue motor heat sink, spare arms(front and rear), rear hubs, front steering blocks, front hub carriers, aluminum shock mount holders, polished suspension pins, Team blue titanium turnbuckles, stock chassis, dual fan set-up, original TC4 box, and instructions plus two new TC4 sticker sheets. Most of this is not pictured. The chassis come with the same SSG battery holder. I just like to use tape.
Email me if you want to see more at [email protected]. Does not come with electronics. I will sell it for $350 shipped out from Bangkok, Thailand to anywhere in the world. payment will be paypal only.
09-17-2005, 02:21 PM
#6289
Tech Master
iTrader: (21)
Just Ordered Mine
Will be here next week.Just wondering if anyone can just summarize any needs or extras etc.Been trying to keep up with this looong thread.lol.Just looking to avoid any problems that can be fixed/modified before I start building the kit.Thanks in advance,Mario.
09-17-2005, 08:57 PM
#6292
Originally Posted by dawgmeat
just switched the aluminum out
09-17-2005, 09:13 PM
#6293
Anyone know if the shock hole locations are the same
on the new cf shock towers as they were on the TC4 molded ones? Has anyone compared them? Thanks.
09-17-2005, 09:49 PM
#6295
Well, I got to see Desrosiers run his TC4 tonight at RCMadness against Dumas and Smyka. Talk about fast!
09-18-2005, 06:31 AM
#6296
Anyone have the part numbers for the carbon fiber shock towers and the piece that mounts them to the diff housing for the new TC4 factory team? I couldnt find them on the web site.
09-18-2005, 06:45 AM
#6297
Towers are 31100 FR, 31101 RR.
Tower Mount 31102
Tower Mount 31102
09-18-2005, 01:09 PM
#6298
Got it.
Last edited by Paul_TC4; 09-18-2005 at 02:01 PM.
09-18-2005, 01:22 PM
#6299
does anybody make a carbon fiber center shaft? Or one that is a little lighter
thanks
thanks
09-18-2005, 02:24 PM
#6300
Try the Team Bomber at
SpeedTech. It's alittle heavier than the Yoke one, but it's stronger,so I'm told.