Team Associated TC4
#301
Tech Champion
iTrader: (42)
Originally posted by Speedo
Tony - how free is the 'train out of the box compared to the TC3?
Josh
Tony - how free is the 'train out of the box compared to the TC3?
Josh
or will you have to dremel and shim to free up the drivetrain...
#302
Originally posted by TPhalen
Yes, the steering DOES come with bearings.
Not 100% sure yet, but most likely the FT TC4 will come with the threaded hard anodized shocks.
Yes, the steering DOES come with bearings.
Not 100% sure yet, but most likely the FT TC4 will come with the threaded hard anodized shocks.
Thanks for coming by the shop the other day and showing me the TC4 And also thanks for the insight you provided during our conversation
Guys, we are still taking pre-orders for the TC4, which we hope to arrive very very soon!
Steve Wang
#303
Tech Addict
Originally posted by AMGRacer
Do you have an email address for Ultimate? I cannot get the TC4 to order with their online system.
Do you have an email address for Ultimate? I cannot get the TC4 to order with their online system.
At Ultimate Hobbies, I know because I work there, also I believe So cal raceway will be getting a shipment as well
Check sometime in the afternoon tommorrow sometime after 2 pm
Thursday the 30th after 2 pm
Best way to order from Ultimate is call, your order is much more secure if you call us. 714-921-0424
Plus were still offering free shipping.
we do also have pretty much all the parts in stock, and there's a lot of new parts
Looks like asc did a great job on this new car, good work
we also have a lot of the new V2 stock endbells, which people have been buying for there quad mag 19 T, I assume to use at this weekends Reedy Truck Race
P.S. Go ANGELS =)
#305
Tech Addict
Originally posted by bigoTC3fan
thanks for the answer on the bearings for the steering, but how about the size of the tierods.how long are they? i'd like to be able to order some before my kit gets here so i can put it together right the first time
thanks Tom
thanks for the answer on the bearings for the steering, but how about the size of the tierods.how long are they? i'd like to be able to order some before my kit gets here so i can put it together right the first time
thanks Tom
I Promise
I held them in my hands
#306
Tech Champion
iTrader: (31)
Originally posted by bigoTC3fan
thanks for the answer on the bearings for the steering, but how about the size of the tierods.how long are they? i'd like to be able to order some before my kit gets here so i can put it together right the first time
thanks Tom
thanks for the answer on the bearings for the steering, but how about the size of the tierods.how long are they? i'd like to be able to order some before my kit gets here so i can put it together right the first time
thanks Tom
two... 1 inch tie rods & four 1.25 inch tie rods... or 25mm & 33mm lenght ones
-Dave
#307
Tech Elite
iTrader: (2)
Originally posted by TCR
TC4 will be in stock tommorrow.
At Ultimate Hobbies, I know because I work there, also I believe So cal raceway will be getting a shipment as well
TC4 will be in stock tommorrow.
At Ultimate Hobbies, I know because I work there, also I believe So cal raceway will be getting a shipment as well
Speedo: The drivetrain on mine is killer out of the box. AFTER the first run (gotta blow the grease outta the bearings) you will have a very free drivetrain.
SpeedTech: NP Stevo. My pleasure. I don't know if we did the drivetrain test or not....I don't think we did.
#308
Tech Rookie
I have to agree with my buddy Tony. You will all be impressed how smoothly the drivetrain straight out of the box is this time! It was quite impressive. Everything was done right
#309
Then when?
Tony Phalen, when can we expect them to be in So California shops? Charlie Jr is having fits! they keep saying later today or tommorrow.
#310
Tech Addict
Re: TPhalen....
is there any differences between the Factory Team shocks other than they are hard coated? Will they be light grey/green?
Just wondering.
Thanks.
Just wondering.
Thanks.
#312
Tech Addict
Originally posted by TPhalen
Sorry to disappoint....but, ummm, no, they won't.
Speedo: The drivetrain on mine is killer out of the box. AFTER the first run (gotta blow the grease outta the bearings) you will have a very free drivetrain.
SpeedTech: NP Stevo. My pleasure. I don't know if we did the drivetrain test or not....I don't think we did.
Sorry to disappoint....but, ummm, no, they won't.
Speedo: The drivetrain on mine is killer out of the box. AFTER the first run (gotta blow the grease outta the bearings) you will have a very free drivetrain.
SpeedTech: NP Stevo. My pleasure. I don't know if we did the drivetrain test or not....I don't think we did.
they were told they'd have them today, they do have all the parts and the turnbuckles
#313
Tech Elite
iTrader: (2)
'Sup Eric!!! Did you get yours yet???
Charlie O: They're close....REAL close. We have almost every part in....
Nightbreed: The hard anodized ones will last a little longer...the hard anodizing doesn't wear as fast. Other than that, they will be the same shock. The color will be a little darker than the green in the pix....those are pre-production samples that I grabbed. Gotta have all the cool stuff when it gets in....
TCR: Ya, the motor mount is a pretty complex piece to make. It looks bad-ass and does what it's supposed to do....help keep the motor cool without sagging the chassis.
Charlie O: They're close....REAL close. We have almost every part in....
Nightbreed: The hard anodized ones will last a little longer...the hard anodizing doesn't wear as fast. Other than that, they will be the same shock. The color will be a little darker than the green in the pix....those are pre-production samples that I grabbed. Gotta have all the cool stuff when it gets in....
TCR: Ya, the motor mount is a pretty complex piece to make. It looks bad-ass and does what it's supposed to do....help keep the motor cool without sagging the chassis.