Ko Propo VFS-1 ESC
#1801
so can the twister 2/ 2.1 and the rest of them... be set without a pc or the setup machine thing ( excuse the numb langauage here im just working out whats what with the latest esc's...)
also what is required to set one up on the pc's, +what do you actually do?
also what is required to set one up on the pc's, +what do you actually do?
#1802
Tech Master
Hey cyclone,
I do not think the Hara2.0/2.1 can be set without the pc or the handheld. But the speedo will run well if u are racing mod motors even without any programming.
To set one up, all u need is a pc, a cable to connect the speedo to ur pc, and software u can download from the KO site.
I do not think the Hara2.0/2.1 can be set without the pc or the handheld. But the speedo will run well if u are racing mod motors even without any programming.
To set one up, all u need is a pc, a cable to connect the speedo to ur pc, and software u can download from the KO site.
#1803
Originally Posted by rcnewb2004
Hey cyclone,
I do not think the Hara2.0/2.1 can be set without the pc or the handheld. But the speedo will run well if u are racing mod motors even without any programming.
To set one up, all u need is a pc, a cable to connect the speedo to ur pc, and software u can download from the KO site.
I do not think the Hara2.0/2.1 can be set without the pc or the handheld. But the speedo will run well if u are racing mod motors even without any programming.
To set one up, all u need is a pc, a cable to connect the speedo to ur pc, and software u can download from the KO site.
also.. the handheld programmer can also program the Ko Propo line of ICS servos
#1804
Tech Master
3 questions to anyone who would want to answer.
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
#1805
Tech Champion
iTrader: (9)
Originally Posted by Nicadrauspro4
3 questions to anyone who would want to answer.
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
2. Hara Twister 2.0 / 2..1
3. same as above
#1806
Tech Master
iTrader: (1)
Originally Posted by Nicadrauspro4
3 questions to anyone who would want to answer.
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
People buy the Hara for the name really, with the programmer, which you should have to make the most of the speedo imo they are all equal.
#1807
Originally Posted by rc-zombies
2. Hara Twister 2.0 / 2..1
3. same as above
3. same as above
you know RC racers...everything has to match.
#1809
Tech Apprentice
HEY GUYS I THINK MY TWISTER 2.1 IS BLOWN WHEN I TURN THE UNIT ON NO LED IS ON AT THE SWITCH AND JUST ROTATES THE MOTOR AT VERY SLOW SPEED . EVEN IF I PULL THE TRIGGER, NEED HELP? IAM FROM AUSTRALIA SO IF BLOWEN WERE DO YOU SEND UNIT TO GET FIXED.
CHEERS BEN
CHEERS BEN
#1810
Originally Posted by Nicadrauspro4
3 questions to anyone who would want to answer.
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
1. Aside from the original KO Propo VFS-1 and other models such as Twister 2.0/2.1, Yokomo Masami model, RS-43/43C Rayspeed model, MMS-3 Corally model, and Volac Tamiya model, what other VFS-1 models are there that I have not mentioned?
2. Which among these models has the best factory programming?
3. Which model is the most popular and consumer favorite?
KO Twister 2.1 has the best. Hara setting profile speaks for itself.
#1811
i installed the 27 turn settings someone posted up here, it started at 5 and ended at 24, the motor sometimes wont turn over early in the throttle, I hear the electronics whining like it wants to turn the motor over but it doesn't. this is even with the pinion off
#1812
Originally Posted by SLIDEQ
HEY GUYS I THINK MY TWISTER 2.1 IS BLOWN WHEN I TURN THE UNIT ON NO LED IS ON AT THE SWITCH AND JUST ROTATES THE MOTOR AT VERY SLOW SPEED . EVEN IF I PULL THE TRIGGER, NEED HELP? IAM FROM AUSTRALIA SO IF BLOWEN WERE DO YOU SEND UNIT TO GET FIXED.
CHEERS BEN
CHEERS BEN
The FETs inside your ESC is fried. send it into your ko propo dealer down under for repair.
- Chris
#1813
Originally Posted by teabag
i installed the 27 turn settings someone posted up here, it started at 5 and ended at 24, the motor sometimes wont turn over early in the throttle, I hear the electronics whining like it wants to turn the motor over but it doesn't. this is even with the pinion off
#1814
Tech Regular
Originally Posted by teabag
i installed the 27 turn settings someone posted up here, it started at 5 and ended at 24, the motor sometimes wont turn over early in the throttle, I hear the electronics whining like it wants to turn the motor over but it doesn't. this is even with the pinion off
#1815
thanks for the help hebiki and trf, i ran it at a parking lot race and it was great for the first lap of practice then i blew the cap out. is this due to the settings too low?