Serpent S411
#646
Tech Champion
iTrader: (31)
JayBee,
My LW LTC-R mounted just fine, Kody actually did it and it went smooth as buttahh. I actually have removed 1mm shim from behind the front arm, moving the arm towards the motor (shorter) and I moved 2mm of shims in front of the rear arm, thus moving the rear arms away from the motor.
My car is really good on its first and only run (dang rain out last week).
Steve
My LW LTC-R mounted just fine, Kody actually did it and it went smooth as buttahh. I actually have removed 1mm shim from behind the front arm, moving the arm towards the motor (shorter) and I moved 2mm of shims in front of the rear arm, thus moving the rear arms away from the motor.
My car is really good on its first and only run (dang rain out last week).
Steve
#647
I say wait 5 weeks and have Kody mount the body..
#648
Tech Regular
I really wanted to try front gear diff. Ordered gear diff from RcMarket and here is retrurn email. Serpent says there is no revision to diff case. RcMarket says different:
Dear Sir,
Your orders we'll processing.
you ordered ( SERPENT 401383 GEAR DIFF SET ) this item will delay release.
because Manufacturer they need change (this item the " case ") ,
so, their shipment will delay arrive.
When we receive this item, we'll send orders to you, OK ?
Best Regards,
www.rcmarket.com.hk
Thank you for choosing RC Market!
Dear Sir,
Your orders we'll processing.
you ordered ( SERPENT 401383 GEAR DIFF SET ) this item will delay release.
because Manufacturer they need change (this item the " case ") ,
so, their shipment will delay arrive.
When we receive this item, we'll send orders to you, OK ?
Best Regards,
www.rcmarket.com.hk
Thank you for choosing RC Market!
#649
Tech Rookie
Not sure if I got a bad one but I got an extra gear diff for front. The one that came with the kit is perfect but the extra one I got the whole casing is not centered.... After mounting it on the car if you spin it the whole thing is going up and down by around 1mm.... And it leaks like crazy..... Yes, I had makes sure the 4 screws which hold the casing together is tighten evenly and the small gap between the casing is nice and even. Anyone have the same issue?
#650
Tech Initiate
Info
guys why the s411 has the 2.5mm frame? how about this frame?
#652
Tech Regular
#654
why use xray gear diff?
#655
Tech Regular
#656
Tech Lord
iTrader: (86)
Only one reason why I did ..when I first got the kit.I was missing parts for my serpent gear diff..I wanted to run my serpent the followering weekend saturday.and I could not get any parts for my car back then until now.
I must say the serpent gear Diff is awesome...
I thanks to Scott K.
I must say the serpent gear Diff is awesome...
I thanks to Scott K.